SeaKnots

I RECENTLY FOUND SOME TO SHARE:

 

White dry sponges...recently written about on the HUNTER BOAT site.

 

Sticky rollers, like for pet hair..picks up crumbs fast and easy.

 

Garden Pump Sprayer ...I was on Brian and Tina's boat and they use a garden  Pump sprayer  to mist themselves, pets,,,when hot.  Also can be a quick shower., clean off hands...etc

 

Vinegar /Water Spay Bottle, use only to flush head.  Keep Sea cock closed...I use the handle but dry pump like , then finish with a final spray....no smell in the head,  May add a little regular water if ness.to bowl.

 

Do you have some you can share?

Views: 61

Reply to This

Replies to This Discussion

If you didn't eat it, don't flush it. Stay between the marks. Have proper ground tackle and learn to set your hook. Learn the rules of the road. Just because you're the "stand on" vessel doesn't mean you get to be an idiot. If I can hit you with a can of corn you've anchored to close. Select-a-size paper towels rule. Don't run your on-deck generator after sun down. Shade cloth will make an unbelievable difference in comfort on sunny days in the cockpit. Dridecks or something similar in the bottom of every locker and under the bunk will make a huge impact against mold in the boat. Lock-n-Locks store food really well.

Bill
s/v Veranda
So, do you have any suggestions for when the dry deck gets black and moldy ? Tomorrow, I'm going to try soaking it in vinegar and water.
If that doesn't work, try MaryKates deck cleaner. Spash it on, let it soak for 15 minutes. Soft brush and fresh water should make the deck look like new. If not, maybe go stronger with hull cleaner. Just keep it off of any aluminum.
Christy uses pretty much anything w/ bleach to clean something like that. We also use that stuff they sell at West thats supposed to deter mold....I can't remember what its called.
i use the sea water to flush head---i just add a coupla cups vinegar nd let sit for a bit then flush thru system to reduce the blockage by salt encrustation....and pump the head for a couple of minuets to rid boat of the nasty rotten egg smell that is made by standing salt water...lol...is easy....

remember, when you bring sand on board on your feets, you are bringing into the boat a medium for removal of finish--sand paper without the paper is same as sand paper.....

i try to keep a bucket of seawater for rinsing my anchor--i donot have a seawater wash down system, as do many modern boats--so i use the bucket to rinse my hands and other things needing rinsing as the anchor is replaced into the locker.....also helpful in the chain/anchor locker is a scraper and a brush for cleaning anchor and chain on their way into locker.....just dont leave the bucket on deck while sailing-it will vanish..LOL

vinegar changes the pH of the environment the mold is trying to live in--so it wont grow in the acidic environment. bleach just turns it white.....
Saturday I sailed on a beautiful Morgan 41.

The Captain used bungie cords to tighten the lazy jacks so the main fell in place. He did this before bringing the main down.

Has anyone else done this?
Don't forget to tie a knot in the bitter ends of your halyards, so they can't run out through the cleat and go over board.

RSS

Latest Activity

Brandon P is now a member of SeaKnots
13 hours ago
Pankaj Tripathi is now a member of SeaKnots
Mar 19
Anna Kokou updated their profile
Mar 8
Profile IconDo My Assignment, William Noah, Thinq Proto and 4 more joined SeaKnots
Mar 7
Michael Boyle commented on CAN DRAC's group Beneteau 40 & 43
"Hi All, french built 2010 43 has been very dry down below but now a slow leak has occurred which is showing at the limber holes under the floor board in forward cabin. Bilge pump goes every 3hrs for 20secs. Not sure if it’s fresh/rain water or…"
Feb 28
LOLA commented on Franc's video
Thumbnail

Do you dream about offshore cruising?

"hello been years since on site. im having trouble changing my heading. are we limited to words? is there an instruction page? Thank you lola"
Jan 23
Filling Machine updated their profile
Dec 27, 2024
Packaging Machinery updated their profile
Dec 24, 2024
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2025   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service