SeaKnots

Leaderboards

Top Content 

Rank
1 Battery Charger

Battery Charger

Posted by Chris on July 12, 2017

2 Teak seat metal protrusions

Teak seat metal protrusions

Posted by sam on August 16, 2017

3 BACKFILLING TOILET ON OCEANIS 43

BACKFILLING TOILET ON OCEANIS 43

Posted by Robert & Sandy on August 9, 2017

4 Anchor upgrade

Anchor upgrade

Posted by Wayne on July 12, 2017

5 B43 wheel leather

B43 wheel leather

Posted by Dave Shore on May 17, 2017

Top Members 

Rank
1 sam

sam

Seabrook, TX, United States

2 Wayne

Wayne

3 Robert & Sandy

Robert & Sandy

Bilgola, Sydney, Australia

4 James Taylor

James Taylor

Richmond, VA, United States

5 Mike Brown

Mike Brown

Hatfield, PA, United States

Top Photos 

This Leaderboard is empty.

Top Videos 

This Leaderboard is empty.

Top Blog Posts 

This Leaderboard is empty.

Latest Activity

James Taylor replied to Chris's discussion Battery Charger in the group Beneteau 40 & 43
"All great advice! Did you check the charger's "battery type" selector switch position (flood,gel,agm)? Our Dekka agm's ( 396ah house and 98ah engine) gave us over 7 1/2 years of usage before replacement. The batteries were still…"
yesterday
Mike Brown replied to sam's discussion Teak seat metal protrusions in the group Beneteau 40 & 43
"Sam, I have not seen anything like that on my or others 40/43s. I don't understand why they would even do such a thing considering there's no other material they could drive a brad into. Grinding the tops off flush sounds like the right…"
yesterday
Mike Brown replied to Wayne's discussion Anchor upgrade in the group Beneteau 40 & 43
"Peter, I've also lost the scupper covers. I installed rubber pipe insulation over each side of the bridle and it works well in keeping the bridle from rubbing on the covers. . They'll need to be replaced periodically as they'll get…"
yesterday
Arne Opperud replied to sam's discussion Teak seat metal protrusions in the group Beneteau 40 & 43
"I have used Boracol treatment once or twice a year. Keeps the black spots away, maintaining a grey patina.      "
yesterday
Arne Opperud replied to Dave Shore's discussion B43 wheel leather in the group Beneteau 40 & 43
"I have used mid tan shoe polish, cream type. Worked well."
yesterday
sam replied to Wayne's discussion Anchor upgrade in the group Beneteau 40 & 43
"Yep, I too have snapped a couple of the clam shell drain covers off. I have a couple of spares, but may or may not replace this time. The slack didn't seem to be the ultimate cause. Seems that wind/tide shifts and wake surge would cause the…"
yesterday
Peter Obetz replied to Wayne's discussion Anchor upgrade in the group Beneteau 40 & 43
"Sam, we are the essentially the same.  Using the same mantus bridle as you.  Quick question to you and any others using a bridle.  We had the bridle rubbing the sides of the bow in a recent storm and it ended up snapping off the…"
yesterday
sam replied to Wayne's discussion Anchor upgrade in the group Beneteau 40 & 43
"On Longhawk we use a Rocna 20KG. I changed out the chain gypsy when new to one that handles 5/16 high Test chain. Then I went with 175 ft of 5/16 HT chain tailed with 200 ft of three strand.(overkill, but I had the rode as supplied new). For a short…"
yesterday
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2017   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service