zeehag's Discussions (597)
Welcome to
SeaKnots
About
Latest Activity
Foster, use the NMEA 0183 plug. My E120 came with a short data cable that I connected to apx 30' of standard data cable. Unless your AIS indicates a different baud rate make sure you set it to 38400. You'll find the setting in Systems Setup.
Mike
Hi
I do not have my owners manual with me here (its on our boat that is 80 miles away)but I think I connected the serial head to the vga out connector on the E120. Hope this helps
James
Did Hampton last year and relly enjoyed it. They have a town marina there with lots of transit slips or you can drop the hook right there off the town marina docks (green top) and go to shore via dingy dock. There is a very nice hotel and lots of ...
Hello,
Thank you for the information. Can you tell me on which plug you put your video cable on the E120
You will find enclosed a few pictures of battery charger and monitor on our Oceanis 43
Denis
James, it sounds like a great plan. I hope you'll be able to do al if not some of it. As you said even a portion of it would be wonderful. My job would permit me to do the same thing but unfortunately my wife's does not. Eventually we'd like to do...
James, the Honda genset sounds nice, especially the Ecco mode. Right now I don't have any plans on adding one but it's something I'll keep in mind. To install the Victron I drilled through the bulkhead. The engine insulation came with it although ...
Yeah, I have the voltage panel now but its not giving me enough "real" info on battery status. We will be monitoring both the house and engine battery.As you know we carry a Honda gen as back up and use it to charge the batteries when on the hook....
© 2009 Created by CAN DRAC
