Beneteau 40 & 43 Discussions (347)
| Discussions | Replies | Latest Activity |
|---|---|---|
Squeaky floor boardsHey Bene experts! Does anybody else's floorboards squeak when you walk across them? May seem trivial, but early in the morning or late nig… Started by clayton curtis |
6 |
Jul 10, 2013 Reply by Fred McNeil |
Teak Companionway FinishMy teak companionway doors are starting to show some fading. I'd like to maintain the finish, so I wrote to Beneteau to obtain the finish… Started by GaryG |
3 |
Jul 8, 2013 Reply by clayton curtis |
To generate or not?Hi all, I've followed the discussions of where is the best place to put a generator on a B40/43, and I'm interested in potentially adding… Started by clayton curtis |
4 |
Jul 7, 2013 Reply by clayton curtis |
Adding AIS - So many options...Hi guys, I hope that sailing is going well so far! This year's project is to add an AIS receiver that integrates with current instruments.… Started by Donizetti |
2 |
Jun 5, 2013 Reply by Mike Brown |
Cockpit latches problemMy B40 #247 has 5 push button style latches in the cockpit and within the first year all but one failed. 2 failed because the button, when… Started by GaryG |
4 |
Jun 3, 2013 Reply by Robert & Sandy |
Great Day Sail in Bene 40 on Tampa BayCool pic from fast sail. Started by Peter Obetz |
3 |
May 28, 2013 Reply by Mike Brown |
Cockpit latches problemMy B40 #247 has 5 push button style latches in the cockpit and within the first year all but one failed. 2 failed because the button, when… Started by GaryG |
0 | May 18, 2013 |
Speed seal life installation on Yanmar 54HP.To have a perfect fit you have to shave about 1mm of the extremity of the raw water hose and place the collars in a way that they do not in… Started by foster |
0 | May 11, 2013 |
Motoring speed with a Brunton AUTPROPHello, Here are some measures. This in an increase of arond a knot or for the same cruising speed 500 rpm less. I will try to get also… Started by foster |
1 |
May 10, 2013 Reply by Rafa |
Mainsail stucked in mast... :(Hi all. Just installed the main with a friend that did not, in my opinion, keep enough tension on the outhaul when I was rolling the mainsa… Started by Donizetti |
6 |
May 6, 2013 Reply by Donizetti |
Latest Activity
"Hi All,
french built 2010 43 has been very dry down below but now a slow leak has occurred which is showing at the limber holes under the floor board in forward cabin. Bilge pump goes every 3hrs for 20secs. Not sure if it’s fresh/rain water or…"
Do you dream about offshore cruising?
"hello
been years since on site.
im having trouble changing my heading. are we limited to words?
is there an instruction page?
Thank you
lola"
© 2025 Created by CAN DRAC.
Powered by
