Beneteau Corner Discussions (11)

← Back to Beneteau Corner
Discussions Replies Latest Activity

what is it ??

Ok folks, anyone know what this is? I saw it on a 1983 beneteau 11,5 m IDYLLE, There  is one on each side. The top hole is threaded and the…

Started by sam

0 Mar 8

Holding tank odors

Our new B40 emits bad odors from the holding tank vent on the starbopard side of the hull. No odors in the cabin, but when we sail and the…

Started by GaryG

6 Dec 16, 2014
Reply by Justin Clarke

beneteau refrigeration

Hi all! I'm new to Seaknots and Beneteau corner but thought I would throw this out there. I have an 1995 Oceanis 440. This is our 5th seaso…

Started by Bill & Evelyn Swartz

4 Sep 20, 2012
Reply by Stephen Hegyesi

Installing arch on Beneteau Oceanis 411

I hope to be the proud owner of a Beneteau Oceanis 411 in the near future. I'm looking for ideas on how to go about installing an arch whos…

Started by Peter

4 May 27, 2011
Reply by Mark and Karen

Options or Upgrades you added to your Beneteau?

Hi All- There are so many options out there. I was wondering what options or upgrades you added to your Beneteau that you are happy with a…

Started by Andrea

54 Feb 4, 2011
Reply by Peter

Looking to purchase Beneteau Oceanis 411

I plan to make an offer on a Beneteau Oceanis 411. I will do a detailed personal inspection and if things look promising proceed to survey…

Started by Peter

2 Feb 4, 2011
Reply by Peter

teak care

I am new and trying to lear how to take care of my boat. Benetau 423. The teak is in very bad shape and I would like some information. How…

Started by Jaime Rodriguez

8 Dec 26, 2010
Reply by shelley won

Main Will Not Come Down without Assistance

We have a new B40 with Classic Rig Main and it is painful to bring it down. We are not sure what is wrong, but would like to hear from all…

Started by Jeff Jakus

2 Oct 4, 2010
Reply by Jeff Jakus

SSB Radio

I have always wondered if SSB is really worth it, when Coastal Cruising, thoughts? comments? ideas?, I have used SSB for things like weathe…

Started by Ron Manicom

3 Jan 17, 2010
Reply by DRAC VERD

Beneteau emblem

Would love to find a Beneteau emblem for my car. Anyone have any ideas where one might be found? Thanks Carole

Started by carole lowry

6 May 27, 2009
Reply by Fotis


Latest Activity

LHOgden commented on SeaKnots's group O'Day Corner
"Good luck !"
John commented on SeaKnots's group O'Day Corner
"Thanks Lynn.  The blocks do line up with the bung holes on the top side rails.  Looks like I'm going to have to just start taking it a part to see what I have. John "
LHOgden commented on SeaKnots's group O'Day Corner
"Even though I owned an 1980 O'Day 30, I can't answer that question.  However, a builder that screws in hand rails on a 30 foot cruiser would be asking for liability claims.  I don't believe O'Day would have done…"
John commented on SeaKnots's group O'Day Corner
"Thanks Lynn, My Oday is an '84 Oday 30.  It does have one or two white caps on the cabin overhead, but it also has an interior handrail that is mounted on black rubber blocks.  I removed a bung from one of the interior handrails and…"
LHOgden commented on SeaKnots's group O'Day Corner
"John, It depends.  What model O'Day are we speaking about?  Who put the rails on in the first place?  Are there white caps about 3/4 of an inch on the cabin overhead under where the handrails are?  If yes, the rails are…"
John commented on SeaKnots's group O'Day Corner
"Has anyone ever removed your handrails for resealing?  I have a leak and I'm not sure if I need to remove them from the topside or from below in the salon. "
John posted a discussion

Resealing handrails on Oday 30

I'm going to attempt to reseal my handrails on our 84' Oday 30.  I noticed there are screw holes (teak plugs) both on the topside and down in the salon.  Does anyone know if both screws need to be removed to reseal or just the topside screw?See More
Luis Vieira de Sá replied to sam's discussion Engine hour meter whacky in the group Beneteau 40 & 43
"Hi, Just before my starting battery (six years old) went dead when I was at anchor (that was another story) I was having erratic readings or better saying - the lcd was very difficult to read even during the night. When the new battery was mounted,…"
Sep 25

© 2015   Created by CAN DRAC.

Badges  |  Report an Issue  |  Terms of Service