SeaKnots

I have noted over time that several generator brands and sizes have been selected. I have a 2 cabin B43 and beginning my selection process. I have two air conditioning units, a 16K btu and a 10K btu unit, along with microwave, etc. What size and brands have folks chosen with similar electrical loads? Also, any things learned about mounting locations? I am considering the port lazerette. Also, how much sound difference have folks identified from using the water / gas separator  after the water lift muffler.

Really appreciate the group's input.

Sam

LONGHAWK B43 #9

Views: 451

Replies to This Discussion

Hi Sam

Mine is a 2 Cab 40

Following Alain's advice I installed a Paguro 4000 in rear starboard lazarette.

Paguro is raw water cooled, but light and only one to fit without cutting.

I have similar loading to you and am very pleased with the Paguro.

 

I don't have gas water separator and don't feel much need for it.

But I have (well almost finished) put extra sound insulation in lazarette.

Particularly necessary on bulkhead adjacent to rear cabin

Have seen picture of a Westerbeke in port lazarette.

See below

 

 

 

Hello  Sam,

 

Here are some pictures of the generator. Mastervolt 3,5M on an isolation pad and with water gas seperator. You hardly hear the generator.

 

At home I have pictures of the work finished.

 

That way the generator is low and centered and the lazarette free.

 

For the moment all works well.  The Paguro 4000 or a Panda would fit to.

 

We don't have AC so 3,5 with the mass combi 2500/100 charges well the 600AH AGM and allows watermaker and microwave.

 

Best regards.

 

Denis

Hi Sam

Paguro is the best ...

If you want, I can ask prices from Voipi ( manufacture of The Paguro situated near Trieste,a few minutes by car from my Homeport). Maybe we can manage that I send it to you ass a present ( cause of the taxes ) :-)

 

 

RSS

Latest Activity

Brandon P is now a member of SeaKnots
Friday
Pankaj Tripathi is now a member of SeaKnots
Mar 19
Anna Kokou updated their profile
Mar 8
Profile IconDo My Assignment, William Noah, Thinq Proto and 4 more joined SeaKnots
Mar 7
Michael Boyle commented on CAN DRAC's group Beneteau 40 & 43
"Hi All, french built 2010 43 has been very dry down below but now a slow leak has occurred which is showing at the limber holes under the floor board in forward cabin. Bilge pump goes every 3hrs for 20secs. Not sure if it’s fresh/rain water or…"
Feb 28
LOLA commented on Franc's video
Thumbnail

Do you dream about offshore cruising?

"hello been years since on site. im having trouble changing my heading. are we limited to words? is there an instruction page? Thank you lola"
Jan 23
Filling Machine updated their profile
Dec 27, 2024
Packaging Machinery updated their profile
Dec 24, 2024
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2025   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service