Added by Marlene Anne Sassaman on September 29, 2012 at 7:58pm — No Comments
Convinced I should launch SPRAY despite feelings of a poorly executed sealing job, there was a feeling of relief when she stayed dry upon her initial splash. For the next three hours the repaired sections stayed bone dry. Eventually I drifted off to a light sleep but easily woke up while shifting positions. With a bit of hesitation I checked the propellar shaft area and noted only a teensy bit of water entered during the night. Replacing the properllar shaft, by a workman at the yard, was…
ContinueAdded by Marlene Anne Sassaman on September 28, 2012 at 5:54am — No Comments
Well, well, well, for two days I have been practicing how to screw. Now, don't get the wrong idea. All of this screwing has to do with adhering two wooden disks designed to cover and seal out water from the center board's swivel pin. First, the 4 disks had to be epoxied. If you saw my epoxy work you would know that goo went mostly in places other than on the disks. Consider that one of the disks had to be put on in a narrowing compartment barely 3 inches wide where the bottom screw goes.…
ContinueAdded by Marlene Anne Sassaman on September 26, 2012 at 6:26am — No Comments
Added by Marlene Anne Sassaman on September 7, 2012 at 4:44am — No Comments
© 2025 Created by CAN DRAC.
Powered by