I'm a cabinetmaker refitting our 34' Yorktown, Olympian. We are about a year away from living on board and sailing. We do landscape maintenance to fund the project.
Current location:
Home Port, Morro Bay, California
Looking to:
Sea of Cortez and Central America
Comment Wall (6 comments)
You need to be a member of SeaKnots to add comments!
It's ok Peter, I was going to bid, but my boat worker looked my door area over and we are going to have to build one...It is really a wacky door,,,no 2 sides match,
ok I measured my outside trim on my door: I looked at your 2 doors..ok: I measured to the outside of my trim.
top width is 28 in
36.5 in high on the right as viewed from outside
36 high on left
across the bottom width 21 in....
Now I do have some room at the bottom..to the deck of white fiberglass. Go to my discussion to see the pictures again.
What do you think? Thank you for your help...Lola
Welcome. I'm glad you are a cabinet maker...please go to my discussion on left side of my page...I have an odd shaped companionway openning on my boat...I have pictures there...any ideas????Can I see pictures of your boat?
"Hi All,
french built 2010 43 has been very dry down below but now a slow leak has occurred which is showing at the limber holes under the floor board in forward cabin. Bilge pump goes every 3hrs for 20secs. Not sure if it’s fresh/rain water or…"
Comment Wall (6 comments)
You need to be a member of SeaKnots to add comments!
Join SeaKnots
Regards, Peter

It's ok Peter, I was going to bid, but my boat worker looked my door area over and we are going to have to build one...It is really a wacky door,,,no 2 sides match,top width is 28 in
36.5 in high on the right as viewed from outside
36 high on left
across the bottom width 21 in....
Now I do have some room at the bottom..to the deck of white fiberglass. Go to my discussion to see the pictures again.
What do you think? Thank you for your help...Lola