"Over the sheave inside the mast then out through the mast about 6 feet from the mast base."
-
Brian Wanamaker
- Male
- Cumming, GA
- United States
- Blog Posts (1)
- Discussions (4)
- Events
- Groups (2)
- Photos
- Photo Albums
- Videos
Brian Wanamaker's Groups
Gifts Received
Brian Wanamaker has not received any gifts yet
Brian Wanamaker's Page
Latest Activity
"Ste spinnaker halyard should be put back through the mast. Over the sheave inside the mast then out through the base.
I had a profurl furler. If you have the same there has to be a "Twist Stop" attached to the forestay near the top…"
Profile Information
- Profile Type:
- Sailor
- Homeport:
- Lake Lanier, Cumming GA
- About Me:
- My wife and I lived and cruised between Little River SC, where we owned a boat slip at Myrtle Beach Yacht Club, and St. Martin. We did this for 2 years and had a great time. I look forward to doing it again in a few years. Lake Lanier in GA is way too confining for a "blue water" sailor!
- Current location:
- Baldridge Marina
- Destinations visited:
- Many Islands from Bahamas to St Martin
- Looking to:
- Get back into blue water with boat homeported in St Mary's GA
Brian Wanamaker's Blog
Selling my boat Brianne
Posted on June 11, 2013 at 12:09pm 0 Comments 0 Likes
After struggling with this we are selling our Beneteau 405M OC400. You can see her listed with Whitaker Yacht Sales at this link:
http://www.whiteakeryachtsales.com/bl-2420-Brianne.aspx
Anyone who knows of someone looking for a great boat can contact the broker. Your help is greatly appreciated.
Brian
Welcome to
SeaKnots
Latest Activity
"Hello Randy,
New to the group, going through the posts, I have come upon this thread. I was considering tinting my windows of my Beneteau 43 with a darker tint, but I really like your idea. So I will copy with…"
Beneteau 40 & 43
A place to exchange thoughts, ideas and discussions about the Beneteau/Oceanis 40 and 43 models.
"Larry good luck. And remember to use the KISS Method when troubleshooting. Keep It Simple Stupid haha. It’s an old and basic concept that dictates you always do the easiest and obvious stuff first. Then if it doesn’t fix it get more…"
"Thanks Mike, good advice which I will follow."
"Sounds like you need to give that windlass some TLC. I used to clean and apply a light coating of grease to all the surfaces in and under the gypsy. It remained smooth over a 10 year period. Five of those years were spent cruising full time on the…"
B43 Windlass Drainage
Doing some maintenance on my B43 Quick Antares windlass this year. After removing the windlass, I knew instantly that I should have been doing this at least ever other year. The windlass was preforming weak and slow with a noise which made me think the motor brushes or a bearing was going out, thus the reason for removing it.What I found upon removal was a tremendous amount of salt and sand on the top part of the gearbox, literally packed in. Upon cleaning everything up, luckily all bearings…See More
"Happy Holidays to you and yours.
Happy to hear its working properly."
© 2022 Created by CAN DRAC.
Powered by
