SeaKnots

Hello All! I am looking for advice on tips and tricks for sail trimming. Simple things to remember...Thanks!

Views: 959

Replies to This Discussion

OK I will give this a try on Melissa's golden rules. Remember I am a crazy boat driver and kids don't try this that a home.
1. Boom should be parallel to the top batten or panel on mainsail.
2. Telltales. Pull the sheet IN on the INside telltale. (Low pressure side of sail) or Let OUT the sheet on the OUT-side telltale.
3. When beating into the wind, both jib and main should look alike in shape
4. Big wind boats on a diet, little sail shape everything tight, Little wind have to eat more, big sail shape everything loose goose. This has to do with the draft or belly of the sail.
5. Fly the mainsail first than the jib. This has to do with trimming order.
6. Big wind, reef main first than the jib to trim out weather helm. Unless you are flying a 130 or greater jib than reef jib to 100-110 percent first.
7. Jib tracks cars.. If you beating move back,, if you are running fast have to move forward. Fine tuning - Move LOWER (back) to fly LOWER telltale, mover HIGHER to fly the HIGH telltale.
8. Boom and backstay controls the upper 1/3 of the mainsail, traveler, downhaul, cunningham along with vang controls the lower 2/3 draft of the mainsail.

Don Guillette probably has the best sail trim book out there. Master his book and you will know more about sail trim than 90% of the people out there. The book is easy to read plus comes with some handy plastic guides to take into the cockpit to help learn how to trim your boat.
Looks like another book I need to get..Thanks Melissa
melissa renee--you know how to verbalize soo much better than i do---goood words here----
Thank you Melissa! Great summary!
I got good advice from member Bob Weeks on this Video...he has the same boat...all this advice helps me..so thanks Melissa and Bob.

" target="_blank">
What Bob Weeks advised on this Video

At exactly 10 sec into this video you will see that the 1st reefing lines are not slack and its causing the sail to be out of shape. Make sure all your reefing lines have enough slack in them so they do NOT effect the sail shape. If they are as far out as they can go then you are 1. using to much line to ty them to the boom or 2. they need to be replaced with longer lines.

Bob

RSS

Latest Activity

Brandon P is now a member of SeaKnots
Apr 18
Pankaj Tripathi is now a member of SeaKnots
Mar 19
Anna Kokou updated their profile
Mar 8
Profile IconDo My Assignment, William Noah, Thinq Proto and 4 more joined SeaKnots
Mar 7
Michael Boyle commented on CAN DRAC's group Beneteau 40 & 43
"Hi All, french built 2010 43 has been very dry down below but now a slow leak has occurred which is showing at the limber holes under the floor board in forward cabin. Bilge pump goes every 3hrs for 20secs. Not sure if it’s fresh/rain water or…"
Feb 28
LOLA commented on Franc's video
Thumbnail

Do you dream about offshore cruising?

"hello been years since on site. im having trouble changing my heading. are we limited to words? is there an instruction page? Thank you lola"
Jan 23
Filling Machine updated their profile
Dec 27, 2024
Packaging Machinery updated their profile
Dec 24, 2024
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2025   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service