SeaKnots

Would anyone know where I can find a used Perkins M20 engine manifild?

Views: 138

Reply to This

Replies to This Discussion

Hi. Try:tadinc@earthink.net or call 1-800 927 9295. I advise you not to buy a used one.Nikitas

As NIkitas mentions TAD, I've used them for parts before (full name is "Trans Atlantic Diesels" (http://www.tadiesels.com/).

They are very helpful.  In my case they figured out a way to save me about 30% of what I was going to pay on something.  It was several years ago, for an M30.  I don't recall the specifics.

RSS

Latest Activity

Cam Whitlock replied to Cam Whitlock's discussion Freezer problem in the group Beneteau 40 & 43
"Sam - thanks for the additional detail on the insulation. "
yesterday
sam replied to Peter Obetz's discussion A/C thru hull caution!!!!! in the group Beneteau 40 & 43
"Similarly, I changed out my aircon thru hull and valve a while back. Seems to be an issue. Recently, I was changing the aircon seawater pump and luckily found a valve on the distribution manifold (one pump serves two aircon units) that was fully…"
Saturday
sam replied to Cam Whitlock's discussion Freezer problem in the group Beneteau 40 & 43
"Mike nails the freezer (and Refrigerator) item. Remove the woodencovers on the vents, and if they have never been off you will most likely find a carpet of dust/hair/lint. I drilled small screw holes and added screws to re-attach. Now it is a…"
Saturday
Cam Whitlock replied to Cam Whitlock's discussion Freezer problem in the group Beneteau 40 & 43
"Thanks for the details, this really helps. It will be a few weeks before I get a chance to tackle this.  Fair winds! Cam"
Feb 12
Mike Brown replied to Cam Whitlock's discussion Freezer problem in the group Beneteau 40 & 43
"Cam, I used a wide, flat blade screw driver to pry it off. I took my time and made sure I wasn't forcing it and causing any dents or scratches. It took a little while to do but when done I had good access to the coils. One of the grills would…"
Feb 10
Cam Whitlock replied to Cam Whitlock's discussion Freezer problem in the group Beneteau 40 & 43
"Mike - great information!  I was hoping that there is a way to remove the wood grills. What type of tool did you find worked that didn’t damage the wood?  "
Feb 9
Mike Brown replied to Cam Whitlock's discussion Freezer problem in the group Beneteau 40 & 43
"Cam, keeping the coils clean is essential to max efficiency for both units. For whatever reason our 43 required constant upkeep to keep the coils clean. The wood grates are glued on but can be removed if you work at it using a tool that won't…"
Feb 8
Cam Whitlock replied to Cam Whitlock's discussion Freezer problem in the group Beneteau 40 & 43
"Hey Mike - I agree with you that there is no physical problem with the unit running.  My problem is the drain on the battery.  As a weekend / once / twice a year cruiser, I don’t have solar to recharge my batteries (yet).  I…"
Feb 8
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2019   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service