Any one looking for parts or equipment
Would like to let every know that Continental Yachts Sales in Quincy Ma has a lot to offer. We offer used parts for both power and sail boats, new discounted inflatables rafts, new Samyung marine electronics and other new gear all at dicounted pricing. Continental Yachts Sales also offers storage, hauling, salvage,sales of both power and sail boats. If your looking to sell your boat we offer a low priced listing service for $100.00 no other fees give us a call.
Replies to This Discussion
-
Permalink Reply by ratherbesailing on
-
Do you have used 2 stroke engines?
-
Permalink Reply by chuck on
-
Thank you for contacting us. how ever right now we only have a few four stroke outboards in stock. What size were you looking for we may be able to help find one for you.
-
-
One that I can pick up with one hand! :-) 3.5hp?
-
Permalink Reply by Ladye on
-
I need an Adler Barbour R12 evaporator box 6"x10"x11" . I punctured mine! The compressor (Danfoss Cold Machine) was working fine. Any possibilities and/or suggestions. Not too expensive :(
-
-
Thank you for checking with us, I am checking ouor stock right and will get back you with what we have.
-
-
I am sorry but we don't have any of your items in stock right should we come up with somthing we will let you know.
Again thank you for checking with us.
P.S
They make expoy to repair evaporator's but the problem you are going to have is finding R12 to replace. R 12 is not made any longer and the replacement will not work with the oil that is in your compressor. You may want to check with a local service person.
-
-
I know someone that has R12 so that's not a problem, but I puntured the evaporator and am trying to pry the indention out ... what epoxy do you suggest to repair it that will bond to hold the presurized cold? I've read of several options. Also found an eveaporator on ebay, but will have to sauder the copper tubes.... at least options.
Thanks
-
-
You may want to find somthing like this. This came out of the www.johnstonesupply.com catalog
Red Epoxy
FIG
Catalog Page: 1068
Formulated for patching or sealing on all metals including aluminum and some plastics
Includes two 0.5 oz. tubes
Curing may be performed with a hot air gun or an open flame
Exhibits a unique color change when completely heat cured
Equipment is serviceable within minutes
Temperature range: -100°F to +300°F, bursting strength: 6,000 PSI
-
-
Brother in Law looking to replace his knotmeter on his Tartan 10. Entire unit from sender to display.
-
Permalink Reply by Peter Kafer on
-
It might be less complicated to buy an inexpensive handheld GPS (less than $100 and nothing to install)--more accurate, too but tells you nothing about current.
-
Permalink Reply by LOLA on
-
MOISTURE METER FOR CHECKING FOR DAMPNESS AND WATER IN YOUR DECK OR WALLS. I used it to look at boats to buy. Contact me for more pictures $25.00 plus postage.
-
Permalink Reply by Kevin Wood on
-
Looking for used (or bargain basement priced new) Lewmar 43 self tailing winch - or similar.
Welcome to
SeaKnots
Latest Activity
How should rose water be used on oily skin?
Is rose water good for oily skin? Yes! Now all that remains is to incorporate it into one’s regimen effectively. Here’s how to apply rose water on your face during your skincare regimen:Facial TonerRose water can be used as a facial toner after cleansing. Apply it to a cotton pad and pat it onto the skin.Rose water for oily skin greatly helps reduce dirt and grease, and when applied as a…See More
Pain in my head when I cough
Experiencing head pain when you cough is a condition known as a cough headache. It can have several possible causes, ranging from benign (not harmful) to more serious conditions. Here's a breakdown: Pain in my head when I cough1. Primary Cough HeadacheWhat it is: Benign and not linked to any underlying disease.Symptoms:Sudden, sharp pain in the head triggered by…See More
© 2025 Created by CAN DRAC.
Powered by
