SeaKnots

Do you have an Gangway ?
Where do you fix it on board ?

Views: 100

Replies to This Discussion

Good question! Looking for ideas also, as we we'll be in the Med in 2 months...
In the Med.
Where ??? do you come to the Adriatic sea ? Our road this year is from Koper( SLO ) to Korfu (GR)
We have one from our old boat that we used to get our dog on and off. It's sturdy enough to hold an adult as well. It's built out of pressure treated lumber, is 12" wide and apx 4' long. I cut a 2x6 in half and used 2x4's laterally on the under side in 3 places. One of which I placed with the short edge cut into the 2x6s so that it would provide an edge I could catch on the toe rail. I also took an old rug and cover the 2x4s on the bottom so they would not scratch the gel coat. I can take pictures of it if you'd like.
a gang way from swisstech. Very good stuff.

denis
I am interrested how your fixation is

Mine is mounted on the lower part of the left backwall. It was the only place I found that I could reinforce from behinde. Next season I am going to ad a second mounting place on the Step
I have the fixation on rear stanchions. Like you I have not made the hole in the steps yet since I might use the storage under the steps for the gas bootles and get to use the port lazarette underneath.
Attachments:
Thank you for this picture ...

??? you want to place a gasbotles under the steps.... There is not enough of space ...!??

RSS

Latest Activity

Brandon P is now a member of SeaKnots
Apr 18
Pankaj Tripathi is now a member of SeaKnots
Mar 19
Anna Kokou updated their profile
Mar 8
Profile IconDo My Assignment, William Noah, Thinq Proto and 4 more joined SeaKnots
Mar 7
Michael Boyle commented on CAN DRAC's group Beneteau 40 & 43
"Hi All, french built 2010 43 has been very dry down below but now a slow leak has occurred which is showing at the limber holes under the floor board in forward cabin. Bilge pump goes every 3hrs for 20secs. Not sure if it’s fresh/rain water or…"
Feb 28
LOLA commented on Franc's video
Thumbnail

Do you dream about offshore cruising?

"hello been years since on site. im having trouble changing my heading. are we limited to words? is there an instruction page? Thank you lola"
Jan 23
Filling Machine updated their profile
Dec 27, 2024
Packaging Machinery updated their profile
Dec 24, 2024
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2025   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service