SeaKnots

Hello everyone!

first time posting in this group, everything here is very interesting.

I own a 2008 B40 Oceanis, located in Spain at the moment, and would love to hear your opinions.

The 200l fresh water tank developed a 15cm crack when filling up. The cracki is very easy to see and access. So I have two options, either replacing it which provably is going to be expensive and still not sure if the tank fits through the cabin door. Or try to weld it. For welding I need the exact same plastic material. 

Anyone try welding this tanks? And what kind of plastic it is? Polyethylene? High density polyethylene? Low density?

Your will be much appreciated!

Fair winds,

Matias.

Views: 163

Replies to This Discussion

While I do not know what material the tanks are made of I do know that they are very difficult to repair. We had our water tank in the aft cabin on our 2008 43 replaced due to a crack. They had to remove the bedding and boards under it. I also had the holding tank in the forward head crack. I did the replacement myself. Early year 40 & 43s had faulty tanks. I hope this helps.

Mike

I'd be tempted to try 3M 5200 on it (rather thickly) spreading it over a good sized area with perhaps a couple of patches of fiberglass cloth sandwiched in to hold down flexing.  Just a thought I had.

Wayne

Hi Matias

I had the same issue with my B40 a few years ago.  I had a plastic welding expert check out the crack to see if he could weld it.  He was firmly of the opinion that the crack could not be repaired by welding it.  I had the tank replaced with a new one from Beneteau.  From this you will understand that the tank can be removed from the boat and replaced although it is a tight fit.  As far as I recall the tank was about Euro 200 plus freight and fitting.

Good luck.  John

Hello everyone,

Thank you VERY much for your answers. Really helpful. It’s a relief to know that the tank can be removed, and if the price is still around 200 euros, then that’s a lot less that what I was expecting, so good news. Will call Beneteau to ask for quoatation.

Thanks again to all, 

Matias.

RSS

Latest Activity

Brandon P is now a member of SeaKnots
yesterday
Pankaj Tripathi is now a member of SeaKnots
Mar 19
Anna Kokou updated their profile
Mar 8
Profile IconDo My Assignment, William Noah, Thinq Proto and 4 more joined SeaKnots
Mar 7
Michael Boyle commented on CAN DRAC's group Beneteau 40 & 43
"Hi All, french built 2010 43 has been very dry down below but now a slow leak has occurred which is showing at the limber holes under the floor board in forward cabin. Bilge pump goes every 3hrs for 20secs. Not sure if it’s fresh/rain water or…"
Feb 28
LOLA commented on Franc's video
Thumbnail

Do you dream about offshore cruising?

"hello been years since on site. im having trouble changing my heading. are we limited to words? is there an instruction page? Thank you lola"
Jan 23
Filling Machine updated their profile
Dec 27, 2024
Packaging Machinery updated their profile
Dec 24, 2024
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2025   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service