SeaKnots

Wayne's Discussions (36)

Discussions Replied To (25) Replies Latest Activity

"Mike thank you so much for the inspiration as it is greatly appreciated and much nee…"

Wayne replied Sep 27 to Farewell all

5 Sep 27
Reply by Mike Brown

"Well supposedly it's to be craned into the boatyard and I'm to be notified when it's…"

Wayne replied Sep 27 to Farewell all

5 Sep 27
Reply by Mike Brown

"Sam, this may not be useful to you but when i bought my 40 back in 2016 the surveyor…"

Wayne replied Sep 5 to need VIN alternate location urgently

3 Oct 17
Reply by Robert & Sandy

"Thanks for the info Mike. Now I need to verify it works. I know it gets extremely ho…"

Wayne replied Aug 4 to Engine Blower

3 Aug 4
Reply by Mike Brown

"Well I've been down almost two years with a heart issue that a quintuple bypass didn…"

Wayne replied Nov 19, 2019 to Site getting little use-why?

2 Nov 19, 2019
Reply by Wayne

"I'd be tempted to try 3M 5200 on it (rather thickly) spreading it over a good sized…"

Wayne replied Jul 28, 2019 to Cracked 200l fresh water tank

4 Jul 29, 2019
Reply by Matias Morando

"Yes winter blues here too and hoping to enjoy the boat this year. I was down last ye…"

Wayne replied Jan 15, 2019 to too quiet!

6 Jan 15, 2019
Reply by Wayne

"Hello Ross, Yes I thought my backstays were loose as well and paid a rigger to to ch…"

Wayne replied Jul 15, 2018 to Questions From a new B40 Owner

5 Jul 15, 2018
Reply by Wayne

"Thank you for the input Mike. It's never too late to get advice. Good find on your w…"

Wayne replied Jan 11, 2018 to Inverter

4 Jan 11, 2018
Reply by Wayne

"Is that paste or liquid?"

Wayne replied Jul 18, 2017 to B43 wheel leather

9 Aug 16, 2017
Reply by Arne Opperud

RSS

Latest Activity

Slawomir is now a member of SeaKnots
Nov 2
Maris Ahmed updated their profile
Oct 28
Profile IconJoel Carvalho, Nina, Robert Hindman and 1 more joined SeaKnots
Oct 28
Robert & Sandy replied to sam's discussion need VIN alternate location urgently in the group Beneteau 40 & 43
"Sam On my 43 the VIN is on one of the hull floors (transverse ribs under the floor boards) adjacent to the stove. The are moulded into the gelcoat. Hope this helps. Regards Bilgolabands"
Oct 17
Alice Wong updated their profile
Sep 29
Eleonore Cowan updated their profile
Sep 29
Mike Brown replied to Wayne's discussion Farewell all in the group Beneteau 40 & 43
"Hang in there!"
Sep 27
Wayne replied to Wayne's discussion Farewell all in the group Beneteau 40 & 43
"Mike thank you so much for the inspiration as it is greatly appreciated and much needed.  "
Sep 27
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2020   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service