Would like to let every know that Continental Yachts Sales in Quincy Ma has a lot to offer. We offer used parts for both power and sail boats, new discounted inflatables rafts, new Samyung marine electronics and other new gear all at dicounted pricing. Continental Yachts Sales also offers storage, hauling, salvage,sales of both power and sail boats. If your looking to sell your boat we offer a low priced listing service for $100.00 no other fees give us a call.

Views: 23

Reply to This

Replies to This Discussion

Do you have used 2 stroke engines?
Thank you for contacting us. how ever right now we only have a few four stroke outboards in stock. What size were you looking for we may be able to help find one for you.
One that I can pick up with one hand! :-) 3.5hp?
I need an Adler Barbour R12 evaporator box 6"x10"x11" . I punctured mine! The compressor (Danfoss Cold Machine) was working fine. Any possibilities and/or suggestions. Not too expensive :(
Thank you for checking with us, I am checking ouor stock right and will get back you with what we have.
I am sorry but we don't have any of your items in stock right should we come up with somthing we will let you know.

Again thank you for checking with us.

They make expoy to repair evaporator's but the problem you are going to have is finding R12 to replace. R 12 is not made any longer and the replacement will not work with the oil that is in your compressor. You may want to check with a local service person.
I know someone that has R12 so that's not a problem, but I puntured the evaporator and am trying to pry the indention out ... what epoxy do you suggest to repair it that will bond to hold the presurized cold? I've read of several options. Also found an eveaporator on ebay, but will have to sauder the copper tubes.... at least options.
You may want to find somthing like this. This came out of the catalog

Red Epoxy


Catalog Page: 1068

Formulated for patching or sealing on all metals including aluminum and some plastics

Includes two 0.5 oz. tubes

Curing may be performed with a hot air gun or an open flame

Exhibits a unique color change when completely heat cured

Equipment is serviceable within minutes

Temperature range: -100°F to +300°F, bursting strength: 6,000 PSI
Brother in Law looking to replace his knotmeter on his Tartan 10. Entire unit from sender to display.
It might be less complicated to buy an inexpensive handheld GPS (less than $100 and nothing to install)--more accurate, too but tells you nothing about current.
MOISTURE METER FOR CHECKING FOR DAMPNESS AND WATER IN YOUR DECK OR WALLS. I used it to look at boats to buy. Contact me for more pictures $25.00 plus postage.

Looking for used (or bargain basement priced new) Lewmar 43 self tailing winch - or similar.


Latest Activity

Kerim N replied to Randy Brown's discussion Beneteau 40 Black Mesh Window Covers in the group Beneteau 40 & 43
"Hello Randy, New to the group, going through the posts, I have come upon this thread.  I was considering tinting my windows of my Beneteau 43 with a darker tint, but I really like your idea.  So I will copy with…"
Jan 6
Kerim N joined CAN DRAC's group

Beneteau 40 & 43

A place to exchange thoughts, ideas and discussions about the Beneteau/Oceanis 40 and 43 models.
Jan 6
Kerim N is now a member of SeaKnots
Jan 5
Mike Brown replied to Larry Witty's discussion B43 Windlass Drainage in the group Beneteau 40 & 43
"Larry good luck. And remember to use the KISS Method when troubleshooting. Keep It Simple Stupid haha. It’s an old and basic concept that dictates you always do the easiest and obvious stuff first. Then if it doesn’t fix it get more…"
Dec 23, 2021
Larry Witty replied to Larry Witty's discussion B43 Windlass Drainage in the group Beneteau 40 & 43
"Thanks Mike, good advice which I will follow."
Dec 23, 2021
Mike Brown replied to Larry Witty's discussion B43 Windlass Drainage in the group Beneteau 40 & 43
"Sounds like you need to give that windlass some TLC. I used to clean and apply a light coating of grease to all the surfaces in and under the gypsy. It remained smooth over a 10 year period. Five of those years were spent cruising full time on the…"
Dec 23, 2021
Larry Witty added a discussion to the group Beneteau 40 & 43

B43 Windlass Drainage

Doing some maintenance on my B43 Quick Antares windlass this year. After removing the windlass, I knew instantly that I should have been doing this at least ever other year.  The windlass was preforming weak and slow with a noise which made me think the motor brushes or a bearing was going out, thus the reason for removing it.What I found upon removal was a tremendous amount of salt and sand on the top part of the gearbox, literally packed in. Upon cleaning everything up, luckily all bearings…See More
Dec 23, 2021
James Taylor replied to Robert & Sandy's discussion DOLPHN 40 AMP BATTERY CHARGER in the group Beneteau 40 & 43
"Happy Holidays to you and yours. Happy to hear its working properly."
Dec 17, 2021

© 2022   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service