SeaKnots

We r loooking at fitting a bow thruster to our oc 40. The forward water tank means it has to be behind that and about 2m from the bow. We r told that even with  85k rather than 60k it would still not be very effective! And suggestion is to put in a smaller tank so it can be sited forward of it. Any one any experience, our prob is on the med coast of spain 20k crosswinds just when you are parking. Penny

Views: 210

Replies to This Discussion

Hi Penny,


Are you in Denia? (I ask bc of the wind)


Saludos.
Penny, the factory installation places the thruster behind the water tank and consumes part of the locker under the bed. If you can have the most powerful unit installed as when the winds are above 15kts it is not very effective. I believe the one in our 43 is 6 hp. You'll like having a thruster when docking. It makes handling in tight places much easier. I use ours in combination with the prop walk for even better maneuvering.
Good luck
Mike

Hey Mike

do you know if we have a  Max Power CT60 or CT 80. bow thruster on our boats. My boat is a 2008 40

Mike, I'll try to remember and look tomorrow but if I recall correctly it's a CT60.

Mike

Mike, I checked and it's the CT80.

Mikey

Thanks. on the advice of a surveyor friend we're have a smaller tank installed so the thruster can go in front of it keeping the tube length about 1m , which he says is important, and giving the xtra leverage to cope with .the stronger cross winds.
Good luck with the installation. I'm sure you'll be glad to have the thruster.
Mike

RSS

Latest Activity

Brandon P is now a member of SeaKnots
7 hours ago
Pankaj Tripathi is now a member of SeaKnots
Mar 19
Anna Kokou updated their profile
Mar 8
Profile IconDo My Assignment, William Noah, Thinq Proto and 4 more joined SeaKnots
Mar 7
Michael Boyle commented on CAN DRAC's group Beneteau 40 & 43
"Hi All, french built 2010 43 has been very dry down below but now a slow leak has occurred which is showing at the limber holes under the floor board in forward cabin. Bilge pump goes every 3hrs for 20secs. Not sure if it’s fresh/rain water or…"
Feb 28
LOLA commented on Franc's video
Thumbnail

Do you dream about offshore cruising?

"hello been years since on site. im having trouble changing my heading. are we limited to words? is there an instruction page? Thank you lola"
Jan 23
Filling Machine updated their profile
Dec 27, 2024
Packaging Machinery updated their profile
Dec 24, 2024
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2025   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service