SeaKnots

Time to put down yer wine glass there Tiffany!

Ship in rough seas...I'd be harnessed to the Captain with an EPIRB taped to the top of my head.. :-) P.S. With a pair of marine grade depends on!

Views: 485

Comment

You need to be a member of SeaKnots to add comments!

Join SeaKnots

Comment by Jim Malone on September 2, 2010 at 12:36pm
Great ad for Dramine!!!
Comment by zeehag on December 16, 2009 at 11:42pm
looks a bit busy,,,,LOL
Comment by Terri on December 16, 2009 at 6:44pm
Don't think any of the passengers are going to be thinking about going for a swim or a soak.
Comment by ___/)ances With Sails on December 16, 2009 at 1:30am
Wonder if they bothered refilling the pools and hot tubs afterwards,,,do they carry extra water for that?
Comment by Terri on September 24, 2009 at 8:54am
Doubt it.. maybe duct tape and buckets....hard to be hugging that head with a 35 degree heel!
Comment by LOLA on September 24, 2009 at 8:50am
Talk about terror..for the passengers...seat belts?
Comment by Terri on September 23, 2009 at 5:31pm
So what's your guess on the size of the seas? Hard to tell...i'm guessing 20' - 30'
Comment by William M. Link on September 12, 2009 at 11:27am
Sounds good to me!
Bill
Comment by Terri on September 12, 2009 at 11:22am
found on youtube. Once I get the patent on the marine grade Depends..they'll come 20 to a pack so plenty to go around for all crew!!! Thinking navy with lil white anchors & rose with lil burgee's...what do ya think???
Comment by William M. Link on September 12, 2009 at 11:10am
OMG, Terri. Where did you get that video of the cruise liner in rough seas. I have been out there in pretty rough seas but I don't think they compared to that. I think I would have to borrow one of your Depends LOL.

Bill

Latest Activity

Mike Brown replied to Wayne's discussion Jammed Electric Cabin Top Winch in the group Beneteau 40 & 43
"There's no circling on the 40/43 winches. It's simply a screw off collar. WD40 and a heavier hammer should get the job done."
Jun 12
Bruce Bogdanoff replied to Wayne's discussion Jammed Electric Cabin Top Winch in the group Beneteau 40 & 43
"Mike is correct. The is a vertical pin in the middle of the winch handle hole that pushed down and disengages the electric motor on the winch. Also, on my Oceanis 45, there is a circlip that holds the top on. I don't remember if the 40 electric…"
Jun 12
Wayne replied to Wayne's discussion Jammed Electric Cabin Top Winch in the group Beneteau 40 & 43
"Thanks Mike. I did use a light hammer but I do have heavier ones at work and I did use WD40. As for a disengagement pin, I didn't see one when I looked down in the top of the winch. I did see a small circular pattern in the bottom that I…"
Jun 12
Frank & Donna left a comment for Mike Brown
"Thanks Mike, however I have tightened both attachments and if you grab the track in the middle you can move it side to side making the noise. I took it apart, slid the track forward to add tape to both side of the boom, than careful slid the track…"
Jun 12
Mike Brown left a comment for Frank & Donna
"Frank your comment didn't show up in the discussions on the 40/43 site. It's simply a comment on your page. Not sure if others will see it. For what it's worth I don't have the problem on our boat. There are two pieces of…"
Jun 11
Mike Brown replied to Wayne's discussion Jammed Electric Cabin Top Winch in the group Beneteau 40 & 43
"I can't imagine anything in the winch top that would bend. Other than the electric drive and a disengagement pin that activates when the winch handle is inserted the winch is the same as the others. It sounds like the collar is jammed due to…"
Jun 11
Wayne added a discussion to the group Beneteau 40 & 43
Thumbnail

Jammed Electric Cabin Top Winch

Took care of the lint build up on the fridge condensers and the leaky shower sump this weekend. Then went to the electric cabin top winch to disassemble, clean and lube only to find the top cap wouldn't unscrew. It should have by light tapping with a screwdriver but to no avail.So I stepped it up a notch with a brass drift and screwdriver and again, no go. I then tried a steel drift and the cap never moved in the slightest. It is as if it was secured with permanent Lock Tite.Now when I say its…See More
Jun 11
Frank & Donna commented on CAN DRAC's group Beneteau 40 & 43
"I'm having a knocking from the boom while sailing. The track on top of the boom is loose, but it can't be tightened any further. Has anyone else had this problem, if so has anyone found a solution"
Jun 11
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2017   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service