SeaKnots

Views: 440

Comment

You need to be a member of SeaKnots to add comments!

Join SeaKnots

Comment by CAN DRAC on April 26, 2009 at 4:59am
Talk about being in the wrong place at the wrong time-ouch!
Comment by Suky on March 11, 2009 at 12:02am
YIKES.....another reason to wear a life jacket... you just don't know what weird thing will happen.... guy thrown looks like he was swimming back to boat.... !
Comment by Terri on March 9, 2009 at 5:13am
Somebodie's got some splain'n to do! Hope the guy knew how to swim! yikes!!
Comment by zeehag on March 9, 2009 at 1:16am
ouchies, mon!!
Comment by LOLA on March 8, 2009 at 10:34pm
Looks like no damage? Wow

Latest Activity

Arne Opperud replied to sam's discussion Teak seat metal protrusions in the group Beneteau 40 & 43
"I have used Boracol treatment once or twice a year. Keeps the black spots away, maintaining a grey patina.      "
1 hour ago
Arne Opperud replied to Dave Shore's discussion B43 wheel leather in the group Beneteau 40 & 43
"I have used mid tan shoe polish, cream type. Worked well."
1 hour ago
sam replied to Wayne's discussion Anchor upgrade in the group Beneteau 40 & 43
"Yep, I too have snapped a couple of the clam shell drain covers off. I have a couple of spares, but may or may not replace this time. The slack didn't seem to be the ultimate cause. Seems that wind/tide shifts and wake surge would cause the…"
2 hours ago
Peter Obetz replied to Wayne's discussion Anchor upgrade in the group Beneteau 40 & 43
"Sam, we are the essentially the same.  Using the same mantus bridle as you.  Quick question to you and any others using a bridle.  We had the bridle rubbing the sides of the bow in a recent storm and it ended up snapping off the…"
4 hours ago
sam replied to Wayne's discussion Anchor upgrade in the group Beneteau 40 & 43
"On Longhawk we use a Rocna 20KG. I changed out the chain gypsy when new to one that handles 5/16 high Test chain. Then I went with 175 ft of 5/16 HT chain tailed with 200 ft of three strand.(overkill, but I had the rode as supplied new). For a short…"
4 hours ago
sam replied to Dave Shore's discussion B43 wheel leather in the group Beneteau 40 & 43
"My wheel leather is shot. Not only do I have spots of eroded / worn areas but the stitching is now going also. Instead of trying to salvage the Cordavan/ Buckskin or whatever color they call it, I plan on stitching up some new elk leather grey…"
5 hours ago
sam replied to Chris's discussion Battery Charger in the group Beneteau 40 & 43
"Chis, I have a 2008 B43 with what I expect is the same charger. Its a Xantrex 40 Amp. It does "run" a lot. As Mike responded. the fan is often on. Mine has done this  since essentially day one, cycling often.I have 660 amp hours of…"
5 hours ago
sam added a discussion to the group Beneteau 40 & 43
Thumbnail

Teak seat metal protrusions

All knowing list....I have a new question.My boat is 9 years old now, and the teak seats are beginning to have metal "brads" sticking up out of the teak. My teak has weathered, as I am of the  natural teak camp, not varnishing or oiling heavily. Has anyone else seen this? Did Beneteau use brads of some sort along with the mastic? I plan on taking a small grinding bit on my dremel tool and touching each one until they are no longer standing proud, then do a little light sanding. Thoughts and…See More
5 hours ago
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2017   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service