___/)ances With Sails
  • Male
  • Gulf Coast
  • United States
Share on Facebook

___/)ances With Sails's Friends

  • Nia
  • Roger Warren
  • Kate O Donovan
  • Gary Kerr
  • Snik, aka John W. Perkins
  • J.C. Smith
  • Capt Chuck Creel
  • Jackie Stevens
  • Steve Knight
  • Chuck (C_Note)
  • Jim
  • Becky Gilmore
  • MJ Warner
  • Ocean Girl
  • Leonard Reeves

___/)ances With Sails's Apps

___/)ances With Sails hasn't added any Apps yet.


Latest Activity

LHOgden commented on SeaKnots's group O'Day Corner
"Even though I owned an 1980 O'Day 30, I can't answer that question.  However, a builder that screws in hand rails on a 30 foot cruiser would be asking for liability claims.  I don't believe O'Day would have done…"
50 minutes ago
John commented on SeaKnots's group O'Day Corner
"Thanks Lynn, My Oday is an '84 Oday 30.  It does have one or two white caps on the cabin overhead, but it also has an interior handrail that is mounted on black rubber blocks.  I removed a bung from one of the interior handrails and…"
7 hours ago
LHOgden commented on SeaKnots's group O'Day Corner
"John, It depends.  What model O'Day are we speaking about?  Who put the rails on in the first place?  Are there white caps about 3/4 of an inch on the cabin overhead under where the handrails are?  If yes, the rails are…"
John commented on SeaKnots's group O'Day Corner
"Has anyone ever removed your handrails for resealing?  I have a leak and I'm not sure if I need to remove them from the topside or from below in the salon. "
John posted a discussion

Resealing handrails on Oday 30

I'm going to attempt to reseal my handrails on our 84' Oday 30.  I noticed there are screw holes (teak plugs) both on the topside and down in the salon.  Does anyone know if both screws need to be removed to reseal or just the topside screw?See More
Luis Vieira de Sá replied to sam's discussion Engine hour meter whacky in the group Beneteau 40 & 43
"Hi, Just before my starting battery (six years old) went dead when I was at anchor (that was another story) I was having erratic readings or better saying - the lcd was very difficult to read even during the night. When the new battery was mounted,…"
Sep 25
Luis Vieira de Sá replied to Robert & Sandy's discussion YANMAR 4JH5E GEAR SELECTION PROBLEMS in the group Beneteau 40 & 43
"Hello, I only saw this thread today! I had the same problem last year with my Oceanis 40 2010. In my case it was the reverse that would not engage all the times. I also was suggested to remove and check the gearbox. But it turned out that it was…"
Sep 25
Glenn is now a member of SeaKnots
Sep 24

© 2015   Created by CAN DRAC.

Badges  |  Report an Issue  |  Terms of Service