"Ron, Henri from Vydec here. call me 703-314-6304. Hope all is well with you.
Henri."
Racor Vacuum Gauge
Thanks to everyone from Seaknots who have ordered my R2D2 Vacuum Gauge for the Racor Filters. Just ot let ALL know, The discount code of SK81 is still active and is being used all the time. We are now a full time advertiser in Passagemaker Magazine and on their web site, www.trawlerfest.com
I have had great success with this product and it has been keeping me so busy that I have forgotten to go on Seaknots and have hardly been boating on months. Hope to catch up this week and get back to a "normal" Boating Life.
Thanks Again to ALL;; ROB
Comment
Welcome to
SeaKnots
Latest Activity
"Ron, Henri from Vydec, remember ? call me 703-314-6304. Hope all is well.
Henri."
"Robert glad to hear you go the problem solved.
mike"
"Thanks for all your comments my friends at Seaknots.
The halyard has been rerun without passing through the small stainless steel eye, as seen easily in the pic provided by Chris on 17th August.
All furling now takes place without any undue effort,…"
"Well at least you’ve narrowed it down to the Genoa. I doubt here’s any issue with the hull or running gear. Nor do I think the slight list you have will have an impact either as many boats have the same based on how full the water and or…"
"In the meanwhile, I performed some sailing tests trying to be as impartial as possible.
I was sailing close hauled on the starboard and port side. I used the autopilot steering the boat at 37 degrees to the apparent wind. Apparent wind was 12 to 19…"
"Sounds like your rigging may be in need of tuning?????
(Owned B43#19 for 10 years), Sailed from Mass to Tampa to Bahamas with it, great boat, no major issues at all. Boat has flat bottom basically so no need to put rails in water. I found it a very…"
"I’d also do a test using only the main. The more testing you do the more likely you’ll find the problem. I’d also check to see how much the leeward shrouds sag during all the tests. Let us know what you find. Good luck
Mike"
© 2021 Created by CAN DRAC.
Powered by
You need to be a member of SeaKnots to add comments!
Join SeaKnots