I advised last year than when possible I would forward you a copy of our Dolphin Charger manual.
Finally that is now attached and you should have no trouble configuring your unit. Take the cover off to reveal the jumper switches.
As an aside our…"
"I have a 2011 US built Ben 40 and installed to 4D AGM batteries. The capacity increased from 160 to 195 amp hrs no modification needed. I have a Xantrex battery charger that came with the new Boat. There is a button you depress on the charger and it…"
I am away at the moment and cannot access my manual though I am sure if you remove the cover from the Dolphin you will find a series of jumper switches enabling switching between battery types.
AGMs will need a higher voltage than either…"
I wonder the exact batteries that you are using. My boat comes with 2 140 AH batteries and I also would like to replace them with larger capacity ones. However, the size is a problem unless I change/adapt the boxes, the wiring,…"
"That photo shows where lines from your batteries are connected to your charger ( three red positive inputs (lines) from battery and a common shared ground input. Looks like a standard setup. Now you need to investigate a little further…"
"Hi thanks for the response....
I haven't had a reply back from dolphin but it's the weekend now so hopefully soon.
Yeah no more button pushing lol....
I have included a couple photos and I wish it was the Xantrex system and thanks for…"
How is everything with you, I picked interest on you after going through your short profile and deemed it necessary to write you immediately. I have something very vital to disclose to you, but I found it difficult to express myself here, since it's a public site.Could you please get back to me on:(email@example.com) for the full details.
Yes I thought my backstays were loose as well and paid a rigger to to check tensions and inspect all fittings. To my surprise he informed me the person who stepped my mast did a perfect job of tensions and rigging and made no changes. Of…"
"We are retiring next year and plan to sail to Alaska sometime next summer. Is anyone interested in a Cascade rendezvous. Somewhere on the west coast? If not next year maybe the year after. We are going to be headed south to…"
I have a 2008 B40 that a similar problem. On my boat the prop shaft tube exits the hull with only a bead of caulking to keep water from seeping along the tube and entering the boat. Beneteau told the marina that this is the indicator that the…"
"Chris - I ordered the service kit the day you replied. When I installed the new parts, I couldn't see any damage to the old valves or diaphragm, so I was skeptical, but worked like a charm!
Thanks for your help!