Snap on heated jacket instructions

CONNECTING SNAP AND D-RING MUST BE. COMPATIBLE IN SIZE, SHAPE AND STRENGTH. THIS ITEM IS NOT FLAME. OR HEAT RESISTANT. REPAIRS ONLY TO BE PERFORMED BY DBI-SALA. ▫ Insert a battery pack into the power source. ▫ Plug the heated jacket power cable into the DC outlet on the power source. Fig. 1. The outer jacket of the cable must not be utilized as a grounding conductor, Snap/secure the heating cable around the pillars of the membrane. follow the warnings and instructions may result in electric shock, fire and/or serious injury. Avoid loose-fitting jackets, scarves, neckties, flared. Refrigerant Leak Detector with Heated Sensor Reinstall the battery door and tighten the Partial list of detectable SNAP* listed refrigerants.electric shock, fire and/or serious injury. Do not store the jacket, battery holder and battery And then fasten the snap button to secure it. Use heated jacket only with specifically designated battery packs and chargers as noted in the operator's manual for your power source. Use heated jacket only with specifically designated battery packs and chargers Make sure the latches on the battery pack snap into place and the battery