Shimano hydraulic brakes manual

The first step to servicing your brakes is to make sure that your pads still have good wear on them. Firstly, you want to remove your wheel (being extra careful not to compress your brakes when there's nothing between the pads.) With the wheel off, you then need to remove the split pin, by compressing the ends together and sliding it out. We have put together a manual using a Shimano brake to show you how to bleed your brakes correctly and how to get that piston unstuck. Shimano Mineral Oil/ Brake Fluid : 21348 : Bleed Block : 39049 : Wrenches (7 or 8 mm) 31050 : Electronic Super Knips® INOX Plier : 43595 : Nitril Gloves : 36497 : Bit Set : Visit SHIMANO PRODUCT WEBSITE for the latest information. 2019-2020 Compatibility between hydraulic disc brake hose. C-186. Disc brake mount adapter. C-193 C-194 C-195. Ver. 3.3, Nov. 13, 2019, refer to dealer's manual. Drivetrain for MTB components. C-432. Rear drivetrain compatibility [MTB] C-433. 9,10,11-speed rear Hydraulic Disc Brake / DUAL CONTROL LEVER DURA-ACE ST-R9120 BR-R9170 SM-RT900 ULTEGRA ST-R8020 ST-R8025 BR-R8070 SM-RT800 SHIMANO 105 ST-R7020 ST-R7025 BR-R7070 SM-RT70 TIAGRA ST-4720 ST-4725 BR-4770. 2 CONTENTS If any part of the information on the manual is unclear to you, do not proceed with the installation. The procedure for Shimano® Hydraulic XTR, XT, Deore, Saint caliper alignment using an adaptor bracket is as follows: For bracket mounted calipers, fully loosen caliper mounting bolts. This will allow the caliper to move sideways. Depress the brake lever to secure pads against the rotor and maintain pressure.