SeaKnots

Recently we experienced an overheat alarm and had to be towed back to a marina. After doing some quick checks it appeared as though the hot water heat exchanger leaked on the closed loop side and lost enough coolant to create the overheat. This is the side that is plumbed to the engine and carries hot water to and from in order to heat the house water while running. I replaced the water heater, which was 7 yrs old and rather funky inside the cold water supply fitting. I also cleaned the Temperature Compensating Valve inside and out. While doing so I could see where it was leaking slightly from what appears to be a weep hole. Since it was a very minor leak (or maybe the cause of the entire issue) I used Rescue Tape to stem 99% of the leak. I then started trying to find a replacement online without any luck. Tried to get one from my Beneteau dealer but struck out there as well. Finally called Beneteau Parts only to find they don't stock them. They contacted their engineering department and have promised to get back to me. After 3 days and a return call to them they still haven't been able to provide a source for the valve. While I'll still work with them in hopes they can find one I've begun to look outside of the usual marine suppliers. Home Depot carries one but its for a home hot water heater. I suppose I could make it work. Or I could just remove it from the system all together but that would risk someone scalding themselves. Has anyone had an issue with theirs? Any other suggestions?
Thanks
Mike

Views: 407

Replies to This Discussion

Mike

Last month I visited "Sailorman" in Ft Lauderdale. They had a Force 10 hot water heater with the "Temperature Compensating Valve " bypass system. Not sure how old that unit was but they had one. I do not think Force 10 manufactures  water heaters any longer?

James

James, thanks for the note. Apparently Force 10 is now Kuuma. The new water heater I installed is a Kuuma and all indications are they took over for Force 10. I found a valve (also known as a mixer or anti scald valve) that I can purchase from Isotemp. A slightly different design it tempers the hot water by mixing in cold water pretty much like you do when you use a faucet at home. It looks like a simpler design which will allow me to adjust the temperature of the water coming from the water heater, something the current valve doesn't allow. I'll order one later this week.
Mike
Sounds good Mike!
Just an update on the Temperature Compensating Valve (also know as a anti scald valve). I purchased one from Isotemp and a installed it the other day. Since it was designed for an Isotemp and not a Force10/ Kuuma brand water heater I had to pick up a couple of fittings and longer stainless braided hose from the hardware store. I used pipe tape on the fitting threads but unfortunately didn't make enough wraps the first time and some of them leaked. At this point everything is installed, there are no leaks and I now have an adjustable valve with which I can control the temperature of the hot water.
One last comment regarding the amount of buildup inside the old water heater and fittings. I was surprised at the amount of soft gunk that had built up. Especially since we live aboard and always have fresh water passing through the system. Not sure how to address that yet. Mike
Disregard

RSS

Latest Activity

Patrick Findaro posted a discussion

Duct Cleaning Services in Hawkesbury

Duct cleaning Hawkesbury is a process designed to remove dust, debris, and contaminants from your heating, ventilation, and air conditioning (HVAC) system's ducts. Here's what you can typically expect during the process:1. Preparation and InspectionArrival of Technicians: Professional duct cleaners will arrive with specialized equipment like vacuums, brushes, and blowers.Initial Inspection: Before starting, they will inspect your duct…See More
Monday
Patrick Findaro posted discussions
Oct 2
Patrick Findaro posted a discussion

How do I choose the right electric breast pump for me?

The world of breast pumps can be a confusing one! There are a whole range of different products on the market and working out which one best suits your needs can be a little overwhelming! Let's take a look at the two primary categories; manual and electric breast pumps and see how they differ, the advantages and disadvantages of each and how to choose one that will best suit your lifestyle and needs. Choosing the right electric…See More
Sep 30
Patrick Findaro posted discussions
Sep 26
Patrick Findaro posted a discussion

Main Components of an Electric Bike

An electric bike (e-bike) is a bicycle equipped with an electric motor to assist with propulsion. Located in the front or rear wheel hub. Provides propulsion directly to the wheel. Positioned at the bike's crankset. Transfers power through the bike's chain, offering a natural ride feel and better weight distribution. Provides power to assist the rider, reducing the effort required, especially during uphill climbs or…See More
Sep 25
Michael Boyle commented on CAN DRAC's group Beneteau 40 & 43
"Hi all I’ve decided that the time has come to replace the main on My 2010 French built 43. Original main is Elstrom sail and has stood up well, don’t know cloth used, still has good shape but put a couple of tears in main during double…"
Sep 24
Profile IconControlF5 and meetchi.com joined SeaKnots
Sep 24
Patrick Findaro posted a discussion

Want More Search Traffic With #1 SEO Agency In Canada

SEO is one of the most common pathways to find any business or website on search engines like Bing and Google. SEO will help you to improve your site and increase visibility in Google ranking. At WebnOnline, one of the leading and best SEO company in Canada. Professionals working with us are passionate about delivering marvellous outcomes for our clients. With the…See More
Sep 21
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2024   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service