SeaKnots

I have a seeping type leak near where the shaft exits my B43 behind the engine. The leak is not coming from the volvo seal, it puddles underneath the shaft and fills this area with saltwater after about two days. I have read a few posts on other sites about water leaking in from where the shaft exits the hull. Does anyone have any info on this. Going to call Beneteau tomorrow.

Thanks Dave

Views: 147

Replies to This Discussion

Dave

I have a 2008 B40 that had a similar problem. On my boat the prop shaft tube exits the hull with only a bead of caulking to keep water from seeping along the tube and entering the boat. Beneteau told the marina that this is the indicator that the caulk is failing. The marina ,rather than laying the caulk around the shaft, took a Dremel tool and made a small v shaped pocket in the hull around the shaft. This allowed the caulking to be pushed into the pocket and sealing the shaft tube to hull joint in a more workman like fashion. Hope this helps!

William Dill

Kailani B40 

Thanks, Will do when I haul this winter

RSS

Latest Activity

Brandon P is now a member of SeaKnots
11 hours ago
Pankaj Tripathi is now a member of SeaKnots
Mar 19
Anna Kokou updated their profile
Mar 8
Profile IconDo My Assignment, William Noah, Thinq Proto and 4 more joined SeaKnots
Mar 7
Michael Boyle commented on CAN DRAC's group Beneteau 40 & 43
"Hi All, french built 2010 43 has been very dry down below but now a slow leak has occurred which is showing at the limber holes under the floor board in forward cabin. Bilge pump goes every 3hrs for 20secs. Not sure if it’s fresh/rain water or…"
Feb 28
LOLA commented on Franc's video
Thumbnail

Do you dream about offshore cruising?

"hello been years since on site. im having trouble changing my heading. are we limited to words? is there an instruction page? Thank you lola"
Jan 23
Filling Machine updated their profile
Dec 27, 2024
Packaging Machinery updated their profile
Dec 24, 2024
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2025   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service