Tags:
Hi to you,
I have the same boat. Oc 43 with 3 cabins. Would like to install Panda 4000s genset. It has more or less similar dimensions with mastervolt 3.5 or Paguro 4000.
I would like to know is there any way to install this genset without wood work between two aft cabin? I dont want to loose space...
Thanks advance for your helps..
Hello,
I had in the begining the same aprehension doing the wood work as you have.
Finally the wood work was simple and we reinforced its connection with the structural hull.
That space is good for a generator. Mastervolt has stopped manufacturing generators although they make an all in one generator charger inverter that is mechanicaly very similar.
I chose Mastervolt since all our electricity is integarted by a masterbus. It works well. If I didn't have that I would of chosen the Paguro 4000i.
The space in the cabin is not lost since it is where your feet are and its 24 cm on each side access for servicing is great as you can see from pictures. The noise level is suprisingly low with antivibration plate and water seperator and good foam.
The generator has improved our ability to avoid marinas in the med with the watermaker and the batteries 600AH.
I know some boats have replaced the rear water tank by an equivalent fuel tank. Total capacity 400L. And rely on the watermaker for the reduced water tank in the front cabin.
If you want I can send you more pictures on a private mail box.
Have a good day
Yes, the place where we have put it. in this cace you should better reinforce the little tablet an put the Gen. on additional silent blocs ( we are going to do this, this summer because the vibration noise is louder than the real noise of the Gen.
Dear Foster,
My email serkanta@gmail.com . appreciated to receive yr photos as much as you can, will help me..
I also send you pictures of my Generator ...
Welcome to
SeaKnots
© 2024 Created by CAN DRAC. Powered by