SeaKnots

Good day everyone,

I have Hull #39 OC43, looking for any wisdom from the group.

The black paint trim on the salon and deck windows rubs off and runs on the deck which means cleaning the deck almost impossible.  Has anyone had any experience with this and any solution.

Thanks for your help,

John

Views: 32

Reply to This

Replies to This Discussion

I think the key word here is that it is paint.  I let mine go to long and the paint is very thin in some places.  I accidentally got wax on the glass when polishing the fiberglass and noticed weeks later that it looked much better than the non-waxed area.  I cleaned the black paint with a very fine polishing compound and used cleaner wax for the first coat.  rewaxed with pure carnauba wax since.  Been a couple of months and no more black runoff in the rain.  Looks much better.

A charter skipper in Clear Lake TX pulled the Lewmar hatches out of a clients B40 port lights, stripped the black paint, and repainted with Mercury black spray paint.  They looked very good.  Mine will need that when we get back to the states.

RSS

Latest Activity

Cam Whitlock replied to Cam Whitlock's discussion Freezer problem in the group Beneteau 40 & 43
"Sam - thanks for the additional detail on the insulation. "
yesterday
sam replied to Peter Obetz's discussion A/C thru hull caution!!!!! in the group Beneteau 40 & 43
"Similarly, I changed out my aircon thru hull and valve a while back. Seems to be an issue. Recently, I was changing the aircon seawater pump and luckily found a valve on the distribution manifold (one pump serves two aircon units) that was fully…"
Saturday
sam replied to Cam Whitlock's discussion Freezer problem in the group Beneteau 40 & 43
"Mike nails the freezer (and Refrigerator) item. Remove the woodencovers on the vents, and if they have never been off you will most likely find a carpet of dust/hair/lint. I drilled small screw holes and added screws to re-attach. Now it is a…"
Saturday
Cam Whitlock replied to Cam Whitlock's discussion Freezer problem in the group Beneteau 40 & 43
"Thanks for the details, this really helps. It will be a few weeks before I get a chance to tackle this.  Fair winds! Cam"
Feb 12
Mike Brown replied to Cam Whitlock's discussion Freezer problem in the group Beneteau 40 & 43
"Cam, I used a wide, flat blade screw driver to pry it off. I took my time and made sure I wasn't forcing it and causing any dents or scratches. It took a little while to do but when done I had good access to the coils. One of the grills would…"
Feb 10
Cam Whitlock replied to Cam Whitlock's discussion Freezer problem in the group Beneteau 40 & 43
"Mike - great information!  I was hoping that there is a way to remove the wood grills. What type of tool did you find worked that didn’t damage the wood?  "
Feb 9
Mike Brown replied to Cam Whitlock's discussion Freezer problem in the group Beneteau 40 & 43
"Cam, keeping the coils clean is essential to max efficiency for both units. For whatever reason our 43 required constant upkeep to keep the coils clean. The wood grates are glued on but can be removed if you work at it using a tool that won't…"
Feb 8
Cam Whitlock replied to Cam Whitlock's discussion Freezer problem in the group Beneteau 40 & 43
"Hey Mike - I agree with you that there is no physical problem with the unit running.  My problem is the drain on the battery.  As a weekend / once / twice a year cruiser, I don’t have solar to recharge my batteries (yet).  I…"
Feb 8
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2019   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service