hey there,
does anybody know what the distance between the compass and the electronics should be? we are installing a new chartplotter and the only navpod we can find out make the chartplotter too tall. I really don't want to "Drive" via the chartplotter!


Views: 12

Reply to This

Replies to This Discussion

I don't know of any standard recommended distance electronics should be mounted from a compass. However if you mount the chartplotter close enough to the compass to create deviation (error) you can create a deviation table to compensate.

To make a deviation table, just point the boat N, S, W, E and compare the pedestal compass reading to the "magnetic degrees" reading on your chartplotter. The difference between the two numbers is obviously your deviation, and keep the table handy so you can refer to it when necessary.
I’d suppose that a 28" minimum Compass - Chart Plotter separation would be advisable, and more would be better.
Twisting the power supply wires to the plotter will help some.
Consult you compass & chart plotter manufacturers for specific detailed installation instruction.

Deviation cards should be prepared, both with electrical equipment On and with it Off.

In order to minimize Deviation errors, a Magnetic Compass should be installed as far as possible from ferrous metal objects, and those generating magnetic fields;
- at least 28" (70 CM) from any object generating local magnetic fields
- at least 40" (1 M) from radio transmitters, motors, and large metal objects (engine)


Latest Activity

Mike Brown replied to Wayne's discussion Farewell all in the group Beneteau 40 & 43
May 17
Mike Brown replied to Wayne's discussion Farewell all in the group Beneteau 40 & 43
"Wayne, yes I'm still out here. She's looking good and you'll love her. The 38.1 is a perfect size for 2 people with occasional guest (s). Plus she's a sweet sailing boat. I'll attach a short video of one I was delivering…"
May 17
Wayne replied to Wayne's discussion Farewell all in the group Beneteau 40 & 43
"Mike if you’re still out there here is the new boat before commissioning. Should splash by end of this week after 14 months of anticipation! Wayne"
May 17
John Hanrahan liked sam's discussion eyebrow salon window re-bed
May 12
John Hanrahan replied to sam's discussion eyebrow salon window re-bed in the group Beneteau 40 & 43
"Sam, I am just in the process of replacing both of my eyebrow windows.  I have the new ones from Beneteau and am talking with dealer in Florida re Bebeteaus advice. It would be helpful to talk to you about your experience. I have never seen…"
May 7
John Hanrahan posted a blog post

Cabin eyebrow windows

Good morning gang,I have received both port and starboard cabin windows from Beneteau for replacement as the existing leak and are badly etched. Beneteau has referred me to the dealership for installation but I'm having trouble getting a response.   Does anyone have any experience replacing these and any recommendations. JohnSee More
Apr 28
Kerim N replied to Randy Brown's discussion Beneteau 40 Black Mesh Window Covers in the group Beneteau 40 & 43
"Hello Randy, New to the group, going through the posts, I have come upon this thread.  I was considering tinting my windows of my Beneteau 43 with a darker tint, but I really like your idea.  So I will copy with…"
Jan 6
Kerim N joined CAN DRAC's group

Beneteau 40 & 43

A place to exchange thoughts, ideas and discussions about the Beneteau/Oceanis 40 and 43 models.
Jan 6

© 2022   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service