"Hello Randy,
New to the group, going through the posts, I have come upon this thread. I was considering tinting my windows of my Beneteau 43 with a darker tint, but I really like your idea. So I will copy with…"
sailing instruction
are there any private experienced sailors or instructors in the palm beach area?
Replies to This Discussion
-
Permalink Reply by Melissa Renee on
-
I am in the Key Biscayne area. Let me know if you are interested.
Melissa
-
Permalink Reply by Wendy, Matt & Nemo on
-
are you interested in traveling. we would really like to do the instruction on our boat. it would take about 8 hours to get to you!!
-
-
Where in Palm Beach are you locate. It is only about one hour + from me... What type of boat do you have. PM me at Melrna2001 at yahoo dot com
-
Permalink Reply by Stuart Bell on
-
I sail out of the Palm Beach Sailing Club in West Palm. They have a very active small boat instruction and sailing program. I have a bigger boat - Gemini 34 - and have taught for years.
I'd be happy to work with you on your boat or mine. Drop me a note: stu@shearwater-sailing.com and we can see what fits your needs best.
Welcome to
SeaKnots
Latest Activity
Beneteau 40 & 43
A place to exchange thoughts, ideas and discussions about the Beneteau/Oceanis 40 and 43 models.
"Larry good luck. And remember to use the KISS Method when troubleshooting. Keep It Simple Stupid haha. It’s an old and basic concept that dictates you always do the easiest and obvious stuff first. Then if it doesn’t fix it get more…"
"Thanks Mike, good advice which I will follow."
"Sounds like you need to give that windlass some TLC. I used to clean and apply a light coating of grease to all the surfaces in and under the gypsy. It remained smooth over a 10 year period. Five of those years were spent cruising full time on the…"
B43 Windlass Drainage
Doing some maintenance on my B43 Quick Antares windlass this year. After removing the windlass, I knew instantly that I should have been doing this at least ever other year. The windlass was preforming weak and slow with a noise which made me think the motor brushes or a bearing was going out, thus the reason for removing it.What I found upon removal was a tremendous amount of salt and sand on the top part of the gearbox, literally packed in. Upon cleaning everything up, luckily all bearings…See More
"Happy Holidays to you and yours.
Happy to hear its working properly."
© 2022 Created by CAN DRAC.
Powered by
