SeaKnots

I am new and trying to lear how to take care of my boat. Benetau 423. The teak is in very bad shape and I would like some information.
How bring the color back?
thanks
JR

Views: 244

Replies to This Discussion

I've used a product called Teak Guard for several years now and am very happy with it. They have a kit which includes both the teak cleaner and the teak guard. It's water based, very easy to apply and cleans off gel coat with just a damp cloth. Here on the Chesapeake Bay it will last all season. It retains a golden color and will not turn black like teak oils do. Since it's not a varnish or Cetol type product the teak is never slippery. Just scrub it with the cleaner when it's time to reapply, rinse with water and allow to dry. Then put on a couple of fresh coats with a foam brush. Another nice feature is that it will fade and scrub away, so if you don't care for it there's no need to strip the teak. Here's their web site:

www.teakguard.com
thanks
JR
On my Benetau 423 I want to get a Davit for a Caribe 9.5 with 9.9 hp yamaha
we look at different brands and prices.
any suggestions?
we've used teakguard too and am very happy with it.
I am also JR and own a 423. Here is my advice:
Teak Rails
Use a sharp one inchscraper and carefully scrap the rails.
Use 150 sandpaper around the cleats
Sand the entire rail with 220 sandpaper
use masking tape on the inside and outside of the rail and around the cleats
Wipe the teak with acetone
Apply 3 coats of Cetol Marine light over 2 dry days

Seats
Open all the hatches and seal with plastic to prevent sawdust from entering the hatches
Use a belt sander on the teak with 220 grit
wash the teak with acetone
Apply Semco teak sealer

You will be impressed with the results
i use sea water and a 3m pad and scrub .. works well. let it dry and apply teak or tung oil. allow that to absorb. should make a difference. that is how i do my 110 ft of teak cap rail every year.

Teaqua is a fabulous product.  Much easier to use than most & keeps teak looking great, even in the hottest & sunniest weather.

Shelley

RSS

Latest Activity

Robert & Sandy joined SeaKnots's group
Thumbnail

Beneteau Corner

The place for SeaKnots members with an interest in Beneteau
Aug 3
Robert & Sandy posted a discussion

SWITH FOR FORE AND AFT HEADS PUMPS

Our Oceanis 43 was recently serviced and since her return neither of the heads macerators are working. There must be a master switch located on board, trouble is I cannot locate it. Any assistance most welcome.BilgolabandsSee More
Jul 14
Michael Boyle replied to Robert & Sandy's discussion IS SEAKNOTS BENETEAU 40/43 ACTIVE. in the group Beneteau 40 & 43
"Still active and always useful "
Jun 11
Michael Boyle replied to Paul O' Kirwan's discussion Flooding due to Bilge pump Reverse Siphon in the group Beneteau 40 & 43
"Have a 2010 43 and whilst racing recently and well heeled over on port had similar experience. Only in the aft heads and haven’t as yet sorted out where the ingress came from but suspect the shower drain. Never happened before in 15 years with…"
Jun 11
Robert & Sandy added a discussion to the group Beneteau 40 & 43
Thumbnail

IS SEAKNOTS BENETEAU 40/43 ACTIVE.

I note there has been no activity on SeaKnots Beneteau 40/43 since early 2025.Is one of my favourite boating sites still alive and kicking?BilgolabandsSee More
Jun 10
Profile Iconfgdfgdf, phreich, reportotosite and 3 more joined SeaKnots
May 26
phreich liked S/V Compadre's group Cascade Owners Unite
Apr 28
johnyosin updated their profile
Mar 2
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2026   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service