"Yep, I too have snapped a couple of the clam shell drain covers off. I have a couple of spares, but may or may not replace this time. The slack didn't seem to be the ultimate cause. Seems that wind/tide shifts and wake surge would cause the…"
Portland - Torquay
Related Videos
Comment
Welcome to
SeaKnots
Latest Activity
Peter Obetz replied to Wayne's discussion Anchor upgrade in the group Beneteau 40 & 43"Sam, we are the essentially the same. Using the same mantus bridle as you. Quick question to you and any others using a bridle. We had the bridle rubbing the sides of the bow in a recent storm and it ended up snapping off the…"
sam replied to Wayne's discussion Anchor upgrade in the group Beneteau 40 & 43"On Longhawk we use a Rocna 20KG. I changed out the chain gypsy when new to one that handles 5/16 high Test chain. Then I went with 175 ft of 5/16 HT chain tailed with 200 ft of three strand.(overkill, but I had the rode as supplied new).
For a short…"
sam replied to Dave Shore's discussion B43 wheel leather in the group Beneteau 40 & 43"My wheel leather is shot. Not only do I have spots of eroded / worn areas but the stitching is now going also. Instead of trying to salvage the Cordavan/ Buckskin or whatever color they call it, I plan on stitching up some new elk leather grey…"
sam replied to Chris's discussion Battery Charger in the group Beneteau 40 & 43"Chis, I have a 2008 B43 with what I expect is the same charger. Its a Xantrex 40 Amp.
It does "run" a lot. As Mike responded. the fan is often on. Mine has done this since essentially day one, cycling often.I have 660 amp hours of…"
sam added a discussion to the group Beneteau 40 & 43
Teak seat metal protrusions
All knowing list....I have a new question.My boat is 9 years old now, and the teak seats are beginning to have metal "brads" sticking up out of the teak. My teak has weathered, as I am of the natural teak camp, not varnishing or oiling heavily. Has anyone else seen this? Did Beneteau use brads of some sort along with the mastic? I plan on taking a small grinding bit on my dremel tool and touching each one until they are no longer standing proud, then do a little light sanding. Thoughts and…See More
Mike Brown replied to Robert & Sandy's discussion BACKFILLING TOILET ON OCEANIS 43 in the group Beneteau 40 & 43"Robert, it just occurred to me that another thing that you can do before you start making changes is to close the sea water intake thruhull when not flushing the toilet. If that eliminates your problem then you'll know it's definitely an…"
Robert & Sandy replied to Robert & Sandy's discussion BACKFILLING TOILET ON OCEANIS 43 in the group Beneteau 40 & 43"Thank you James.
I am really quite sure the trouble is in the in hose rather than the brown water out.
The latest theory here is the wear plate between the impellor and the housing may be worn causing loss of the seal which is the only…"
© 2017 Created by CAN DRAC.
Powered by
You need to be a member of SeaKnots to add comments!
Join SeaKnots