How To Build & Use "The Easy Climb" - A Mast Climbing Aid

This is an in depth explanation of how to put together The Easy Climb and how to use it - The Easy Climb is a mast climbing aid which together with a bosun's...

Views: 219


You need to be a member of SeaKnots to add comments!

Join SeaKnots

Comment by Joe Goodrow on June 17, 2013 at 1:58pm

This EasyCilmb device is really a great little addition to any boat. I made one and it works as advertised.

using your legs takes the stress out of climbing the mast. It takes only a few seconds to ascend to the very top of your mast. it's so easy that you'll want to go up often.  Love it. and I thank the man at Yacht Parts for making this

available for free.  Thank You   

Latest Activity

Mike Brown replied to Harry's discussion Finding and Preventing Problems in the group Beneteau 40 & 43
"Harry, thanks for sharing the info on your two problems and fixes. Fortunately I haven't seen the mainsail fuller issue. I have seen the shower sump problem though. On my boat pulling and reinserting the red/hot lead at the box under the sink…"
12 hours ago
Mike Brown replied to Robert & Sandy's discussion YANMAR 4JH5E GEAR SELECTION PROBLEMS in the group Beneteau 40 & 43
"Robert, thanks for the update, glad all is well. As for lapping the gear box cones in such a short period of time I still have my doubts about it. Just remember not to fix something that isn't broke.  Mike"
13 hours ago
Robert & Sandy replied to Robert & Sandy's discussion YANMAR 4JH5E GEAR SELECTION PROBLEMS in the group Beneteau 40 & 43
"Morning SeaKnots team, especially Mike. Well Liberte been has slipped, antifouled and polished and most importantly the Gori feathering three blade prop has been serviced. Surprise, surprise there was quite a bit of coral growth in the gearing, not…"
John Hanrahan posted a blog post

Beneteau 43 two cabin slip covers

We are taking out cat Genny to the Bahamas this year and I am fearful of the beautiful white leatherette salon cushions.  If anyone has had cushions made could you please give us a name of the maker.  We can make them ourselves if we had the dimensions but would be happy if there was a custom supplier.  The boat is in the Abacos and we are in Halifax so we can't go and measure.Many thanks, JohnSee More
James Taylor replied to Larry Witty's discussion B43 Inverter Buzzing/humming noise in the group Beneteau 40 & 43
"I looked at the Beneteau USA site under electrical and did not see the transfer switch on your boat in their images of factory installed equipment ( see below) so I'm assuming the transfer switch was installed as a part of the inverter…"
Nov 18
Edward Hart posted a status
"Stopped in Norfolk. New diesel running fine."
Nov 14
Larry Witty added a discussion to the group Beneteau 40 & 43

B43 Inverter Buzzing/humming noise

Hello -Have a 2008 B43 hull 40 which I purchased second hand about a year ago. been very happy with the boat but have 1 annoying problem I would like to resolve. When switching on the inverter I have the following 2 potential issues:1) Voltage display is low, shows between 102-106 volts2) Humming noise coming from some sort of auto switch which is encased in a white plastic box behind the cabinet where the radios are mountedI only have the problem when the inverter is on, no issue with shore…See More
Nov 10
Edward Hart posted a status
"Hooligan is now back in the water with a new diesel and we are heading down the ICW from Annapolis to Jacksonville."
Nov 7

© 2015   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service