Has anyone replaced the rudder bearings on a beneteau 40 2008/9? If someone has done this job could they please tell me what the part numbers are for both the bronze upper and lower bearing sleeves and also for the nylon thrust washers. The jefa? rudder shaft diameter is 60mm.I have !ooked on the beneteau spare parts website without success.Also I am trying to find the workshop notes for rep!acing the bearings as I know with the oceanis 411 the bottom bearing is glued (3M 5200) in but I don't…See More
at the moment I prefer a Folding Prop due to better performance while sailing and also when "motoring".
My gearbox has a ratio in forwarding of 2.36.
don't worry... I'm not American....I'm Italian :-)
I have a Kiwi feathering prop on my Beneteau 43, 4JH5E engine. It looks small and blades are a funny shape but it works perfectly. They set the pitch depending on size of engine, will need to know gearbox ratios, and it has full pitch in reverse…"
Hi, This is my first post in the group and first of alll I want to say Hi at all. I have a Ben 40 with a yanmar 3jh4e (40cv) and I am thinking to buy a flexofold propeller. They suggest me a 18x13R. Have anyone experience with this boat and propeller in terms of sailing performance and boat speed under engine? Do you have data for boat speed at various RPM? Thanks. Best of all for everyone.See More
Hello all,Will take delivery of my '08 B40 9/27/16 and joined this forum. I look forward to the enjoyment of the boat and exchanging info here. Will be on the ICW in south Alabama.Happy SailingSee More