How to use icare tonometer manual

icare ic100 troubleshooting
icare tonometer keeps saying load
icare tonometer probesicare tonometer ta01i manual
icare ic100 manual
icare tonometer troubleshooting
icare tonometer error codes
icare manual

English Icare tonometer TA01i manual probe to the patient's cornea (see picture) should be 4-8 mm (1/6-1/3 inch). If necessary, adjust the distance by The iCare HOME2 tonometer is a device intended for monitoring of intraocular pressure (IOP) of the human eye. It is indicated for use by patients or their Icare tonometers do not require any calibration or regular service. You should contact your local distributor for service if you doubt the measurement results Read this manual carefully, because it contains important information on using and servicing the tonometer. • Keep this manual for future use. • When you have Safety instructions. Intended use. Introduction. Package Contents. Parts of the tonometer. Installing or changing the batteries. Turning the tonometer on.The manual includes instructions on replacing the batteries and changing the probe base. •. Never use the tonometer in wet or damp conditions. •. The probe Icare ic100 tonometer manual ENGLISH INSTALLING OR CHANGING THE BATTERIES Unscrew the battery compartment locking screw with a screwdriver. Remove the battery The Icare tonometermay be surface-cleaned using a soft cloth dampened with either a commercial, nonabrasive cleaner or a solution of 70% alcohol in water.