SeaKnots

ISLANDER FREEPORT 41 OWNERS

Information

ISLANDER FREEPORT 41 OWNERS

Just a fun place to hang out our photos and videos.

Members: 4
Latest Activity: Jun 26, 2019

Discussion Forum

Would like more info

Started by Jan Wilson Aug 7, 2008. 0 Replies

Comment Wall

Comment

You need to be a member of ISLANDER FREEPORT 41 OWNERS to add comments!

Comment by Klaas Nijhuis on June 26, 2019 at 3:42pm

Can anyone tell me if this is normal?  Pre-purchase survey indicated: "The aft lower shroud chain plates for the main mast are not installed with the same orientation on the vessel. The starboard side chain plate is installed in a side to side orientation. The port side chain plate is installed in a fore to aft orientation and shows a slight bend to the inboard side."

Thanks in advance,

Klaas

 

Members (4)

 
 
 

Latest Activity

Mike Brown replied to Wayne's discussion Engine Blower in the group Beneteau 40 & 43
"Wayne, my never ran. I discovered the issue when the fuse blew. I then foolishly bought a new fan and installed it only to have it sound like a helicopter in the cockpit. I cushioned it and tightened it to no avail. I finally disconnected it without…"
Aug 4
Wayne replied to Wayne's discussion Engine Blower in the group Beneteau 40 & 43
"Thanks for the info Mike. Now I need to verify it works. I know it gets extremely hot in the engine compartment after a while. "
Aug 4
Mike Brown replied to Wayne's discussion Engine Blower in the group Beneteau 40 & 43
"The engine compartment exhaust blower is located on the port side behind the vent. You have to remove the propane locker to access it. To remove the propane locker you have to crawl into the rope locker below it and remove the hose that’s…"
Aug 4
Wayne added a discussion to the group Beneteau 40 & 43
Thumbnail

Engine Blower

A moment ago I was reading on another forum about a blower motor not working on a Beneteau 361 and then it occurred to me that I've never seen the engine compartment blower on my B40. If anyone here knows would you please enlighten me on it's location?Thanks,WayneSee More
Aug 3
Mike Brown replied to Chris's discussion Declining Water Pressure in the group Beneteau 40 & 43
"Chris that’s good news. The debris could have been from the tank when they cut opening for the hose fittings. Glad to hear you have it fixed. Mike"
Jul 10
Tevfik replied to Chris's discussion Declining Water Pressure in the group Beneteau 40 & 43
"Good job!! Thanks for sharing the experience "
Jul 10
GaryG liked GaryG's discussion Fresh water leak B40
Jul 9
Mike Brown replied to GaryG's discussion Fresh water leak B40 in the group Beneteau 40 & 43
"If I recall correctly #1 is the aft tank and #2 is forward. We had marked our valves with felt pen to help when switching tanks. I’d start with the forward tank since it appears the water is coming from that direction. Does it only…"
Jul 4
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2020   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service