SeaKnots

Anyone have a lead on finding some stanchion mounts, that fit the cascade custom toe rails. They were custom designed, the last I heard, a group put together for an order of Fifty or so. Might want to do that again???? Jack.

Views: 197

Replies to This Discussion

I may have a few at home. I will check next week. I took them off my 42 when I installed the cascade toe rail.

Boat had teak toe rails that leaked and rotted the deck and sheer clamp. I went with mounts on the deck. 

Tim

I also need some information on the stanchion mounts.  I have one stanchion that tends to lift right out of the socket!  argh ! 

  I would be interested in stanchions.

So I've found what I think will work perfectly in the absence of any word from Cascade. They are anodized aluminum stanchion mounts and I've ordered 12 of them. I'll report back when I see how well they work.

http://www.amazon.com/80-20-Inc-Single-Horizontal/dp/B006YW08CI

RSS

Latest Activity

Slawomir is now a member of SeaKnots
Nov 2
Maris Ahmed updated their profile
Oct 28
Profile IconJoel Carvalho, Nina, Robert Hindman and 1 more joined SeaKnots
Oct 28
Robert & Sandy replied to sam's discussion need VIN alternate location urgently in the group Beneteau 40 & 43
"Sam On my 43 the VIN is on one of the hull floors (transverse ribs under the floor boards) adjacent to the stove. The are moulded into the gelcoat. Hope this helps. Regards Bilgolabands"
Oct 17
Alice Wong updated their profile
Sep 29
Eleonore Cowan updated their profile
Sep 29
Mike Brown replied to Wayne's discussion Farewell all in the group Beneteau 40 & 43
"Hang in there!"
Sep 27
Wayne replied to Wayne's discussion Farewell all in the group Beneteau 40 & 43
"Mike thank you so much for the inspiration as it is greatly appreciated and much needed.  "
Sep 27
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2020   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service