"Terry Kennedy please call"
Stanchion holders
Anyone have a lead on finding some stanchion mounts, that fit the cascade custom toe rails. They were custom designed, the last I heard, a group put together for an order of Fifty or so. Might want to do that again???? Jack.
Replies to This Discussion
-
Permalink Reply by Tim Hryciw on
-
I may have a few at home. I will check next week. I took them off my 42 when I installed the cascade toe rail.
Boat had teak toe rails that leaked and rotted the deck and sheer clamp. I went with mounts on the deck.
Tim
-
-
Permalink Reply by Ray Brown on
-
I also need some information on the stanchion mounts. I have one stanchion that tends to lift right out of the socket! argh !
-
-
Permalink Reply by Edward Hart on
-
I would be interested in stanchions.
-
-
Permalink Reply by S/V Compadre on
-
So I've found what I think will work perfectly in the absence of any word from Cascade. They are anodized aluminum stanchion mounts and I've ordered 12 of them. I'll report back when I see how well they work.
http://www.amazon.com/80-20-Inc-Single-Horizontal/dp/B006YW08CI
-
Latest Activity
"hay hope you are ok/ am friends with ana in fb fb kicked zeehag out for what hacker did to the accounts--- no recourse bubba duran handles all the business now. email works. x works mewe works.... fone works"
"Auto ascending setup is an interesting idea, though it takes a bit of fiddling around to get it right. Once it's dialed in, it actually works quite well."
"Michael,
From experience over three keel boats a fully battened main is almost a requirement.
Not only will it make dropping the sail into the boom bag far easier it certainly reduces any flogging and vastly lengthens the life of the sail. While…"
© 2025 Created by CAN DRAC.
Powered by
