SeaKnots

Beneteau 40 & 43 Discussions (347)

← Back to Beneteau 40 & 43
Discussions Replies Latest Activity

PC Interface

I have a PC interface option on my 2011 Beneteau 40 with Raymarine Instruments including a E90W.Does it act as a repeater and do I need Ray…

Started by Chris

14 Jan 29, 2012
Reply by Serkanta

Holiday Greetings

Happy Holidays. The table lamp makes a nice Christmas tree with a bit of work. Sam LONGHAWK

Started by sam

1 Dec 18, 2011
Reply by Mike Brown

Cutlass bearing

We just pulled out 43 for bottom paint and the yard stated that the cutlass bearing appears worn and should be replaced. They demonstrated…

Started by Fred McNeil

7 Dec 8, 2011
Reply by foster

LED lights for overhead

Anyone changed out the bulbs in the overhead spots to LED'S? If so I would appreciate any input on bulbs used, warm vs cool, etc. Thanks Sa…

Started by sam

6 Nov 29, 2011
Reply by Harry

engine compartment blower

My engine compartment blower is becoming very noisy. It runs all the time when the engine is on. I doubt that it was designed for continuou…

Started by sam

4 Nov 28, 2011
Reply by sam

Custom sails

Hello, Has anyone with the B40/43 changed the sails and the lazy bags delivered with the boat by Beneteau.   I am seeking some advice about…

Started by foster

3 Nov 28, 2011
Reply by Mike Mollison

Dodger design for Bene 40

hello all, now after a season of chilly winter sailing on the gulf coast of Florida, we would like to add a dodger to our existing bimini.…

Started by Peter Obetz

2 Nov 14, 2011
Reply by sam

Battery charger wiring change

I am wanting to change the wiring from the standard dolphin charger so it only charges the bow thruster and engine battery and is disconnec…

Started by Mark and Karen

8 Nov 3, 2011
Reply by Mark and Karen

Fuel filter change -Racor

Just a note on an idea that I have found useful. When changing the racor fuel filter element it's good to fill the canister with fresh fuel…

Started by sam

2 Oct 26, 2011
Reply by Jeff Shukis

Bow thuster batteries

I think we have tracked the bow thruster fault back to the pair of Exxide Maxxima 900dc batteries which seem to have lost their capacity (p…

Started by Mark and Karen

5 Oct 26, 2011
Reply by Jeff Shukis

RSS

Latest Activity

Brandon P is now a member of SeaKnots
Friday
Pankaj Tripathi is now a member of SeaKnots
Mar 19
Anna Kokou updated their profile
Mar 8
Profile IconDo My Assignment, William Noah, Thinq Proto and 4 more joined SeaKnots
Mar 7
Michael Boyle commented on CAN DRAC's group Beneteau 40 & 43
"Hi All, french built 2010 43 has been very dry down below but now a slow leak has occurred which is showing at the limber holes under the floor board in forward cabin. Bilge pump goes every 3hrs for 20secs. Not sure if it’s fresh/rain water or…"
Feb 28
LOLA commented on Franc's video
Thumbnail

Do you dream about offshore cruising?

"hello been years since on site. im having trouble changing my heading. are we limited to words? is there an instruction page? Thank you lola"
Jan 23
Filling Machine updated their profile
Dec 27, 2024
Packaging Machinery updated their profile
Dec 24, 2024
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2025   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service