Hydraulic steering ram
Dave Shore asks
Does anyone know the manufacturer of the hydraulic auto helm installed on some B43's? The piston on mine has a leak on the bottom where the mounting pole sits. Looks like the packing or o-ring fell apart.
My French built 2007 Oceanis 40 has a type 2 linear drive contact is
Thierry ETCHETO
Responsable Vente France
+33 (0) 559 562 646
+33 (0) 682 828 050
+33 (0) 559 569 571
commercial2@ls-france.com
LECOMBLE & SCHMITT SAS - BP N° 2 - 156 route de Briscous - 64240 Urt - France
www.ls-france.com
Replies to This Discussion
-
Permalink Reply by Jeff Shukis on
-
Yes,
It's an L&S (Lecomble and Schmitt) 40 ST. See:
https://www.pyiinc.com/ls/hydraulic-linear-drives.html
https://www.ls-france.com/en/power-packs-and-linear-drives-for-auto...
It's a REALLY nice piece of hardware.
-
-
Permalink Reply by James Taylor on
-
we had this same hydraulic drive on our 2008 B43.
I agree with Jeff Shukis. This is a really nice hydraulic drive. It was extremely reliable and of sturdy construction. Well worth repairing if possible.
-
-
Permalink Reply by John Hanrahan on
-
Dave you can get the gasket repair kit from PYI in Washington at the website below.
https://mail.google.com/mail/u/0/?tab=rm&ogbl#search/LECOMBLE+%...
John
-
Latest Activity
"Hi All,
french built 2010 43 has been very dry down below but now a slow leak has occurred which is showing at the limber holes under the floor board in forward cabin. Bilge pump goes every 3hrs for 20secs. Not sure if it’s fresh/rain water or…"
Do you dream about offshore cruising?
"hello
been years since on site.
im having trouble changing my heading. are we limited to words?
is there an instruction page?
Thank you
lola"
© 2025 Created by CAN DRAC.
Powered by
