My fridge in my B43 is a Frigomatic. I realized that there is no push button connected to the lamp or the door frame to turn off the light. Is this possible or I'm missing something.

Views: 89


Replies to This Discussion

Sounds like a metaphysical question! Yes the light does go off. There is a magnet in the door and a magnetic switch in the cabinet.

Unfortunately my light does not go off. I've put a camera inside to be sure. Closing the door didn't activate the magnetic switch in my case. Must be a failure. 


Latest Activity

LHOgden commented on SeaKnots's group O'Day Corner
"Good luck !"
John commented on SeaKnots's group O'Day Corner
"Thanks Lynn.  The blocks do line up with the bung holes on the top side rails.  Looks like I'm going to have to just start taking it a part to see what I have. John "
LHOgden commented on SeaKnots's group O'Day Corner
"Even though I owned an 1980 O'Day 30, I can't answer that question.  However, a builder that screws in hand rails on a 30 foot cruiser would be asking for liability claims.  I don't believe O'Day would have done…"
John commented on SeaKnots's group O'Day Corner
"Thanks Lynn, My Oday is an '84 Oday 30.  It does have one or two white caps on the cabin overhead, but it also has an interior handrail that is mounted on black rubber blocks.  I removed a bung from one of the interior handrails and…"
LHOgden commented on SeaKnots's group O'Day Corner
"John, It depends.  What model O'Day are we speaking about?  Who put the rails on in the first place?  Are there white caps about 3/4 of an inch on the cabin overhead under where the handrails are?  If yes, the rails are…"
John commented on SeaKnots's group O'Day Corner
"Has anyone ever removed your handrails for resealing?  I have a leak and I'm not sure if I need to remove them from the topside or from below in the salon. "
Oct 3
John posted a discussion

Resealing handrails on Oday 30

I'm going to attempt to reseal my handrails on our 84' Oday 30.  I noticed there are screw holes (teak plugs) both on the topside and down in the salon.  Does anyone know if both screws need to be removed to reseal or just the topside screw?See More
Oct 3
Luis Vieira de Sá replied to sam's discussion Engine hour meter whacky in the group Beneteau 40 & 43
"Hi, Just before my starting battery (six years old) went dead when I was at anchor (that was another story) I was having erratic readings or better saying - the lcd was very difficult to read even during the night. When the new battery was mounted,…"
Sep 25

© 2015   Created by CAN DRAC.

Badges  |  Report an Issue  |  Terms of Service