SeaKnots

My Friends (2)

Latest Activity

Mike Brown replied to Mike Brown's discussion Shower Sump Back Flushing in the group Beneteau 40 & 43
"I removed the check valve and found it to be wide open. Couldn't find a replacement check valve (also called a tricuspid valve) so ordered the service kit for the pump which includes a new valve and housing. Thanks again for the feedback. Mike"
17 minutes ago
Mike Brown replied to Michael Cioffi's discussion Anchor motor in the group Beneteau 40 & 43
"Mike, if you need a new remote control and can't get the circuit board like Dave did you can order one through Beneteau Parts. Mike"
20 minutes ago
Mike Brown replied to Dave Shore's discussion Bilge pump fuse B43 in the group Beneteau 40 & 43
"It's under the seat with the house batteries just inside the aft cabin. There are a number of fuses in that area but it should be an open type that you push into the clips on each end. There are two next to each other located to the left of the…"
22 minutes ago
Andy James replied to Paul Streicher's discussion Beneteau 40 asymmetrical spinnaker tack attachment in the group Beneteau 40 & 43
"I really like your solution, I know this post is old but if you have any other pictures that you could post of the top section I'd really like to copy and install on my 2011 B40 Cheers Andy"
Apr 20
Dave Shore replied to Dave Shore's discussion Bilge pump fuse B43 in the group Beneteau 40 & 43
"Update - From the schematic I know it is a 15 amp fuse, on wire 14, which I believe relates to CB or fuse 14 as well. Still searching...."
Apr 18
Dave Shore added a discussion to the group Beneteau 40 & 43
Thumbnail

Bilge pump fuse B43

Uncovered the boat yesterday, getting her ready to go, while checking things out I noticed that the Rule bilge pump was inop. Checked with the meter and no power. Can someone please tell me where the fuse for this pump is??Thanks DaveSee More
Apr 17
Michael Cioffi replied to Michael Cioffi's discussion Anchor motor in the group Beneteau 40 & 43
"Never thought of that. the remote looks like the day it was installed. I check that out.  thanks Dave"
Apr 13
Dave Shore replied to Michael Cioffi's discussion Anchor motor in the group Beneteau 40 & 43
"Mike, I had the same issue last season, it ended up being the micro switches in the remote. Tried to find a replacement switch to no avail. Check the switch with a meter to see if they are ok. If they are bad, give the windlass manufacturer a call,…"
Apr 12
ADVERTISE ON SEAKNOTS CONTACT US AT: SeaKnots@SeaKnots.com

© 2016   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service