SeaKnots

Hi, I am looking for the best alternative to climb the sail mast. My final list puts ATN mastclimber and the Brion Toss harness. I see the ATN practical in that one could auto ascend. On the other hand I understand when close to the top the metal parts gets to close with the mast causing some minor scratches to the mast. On Brion's it looks really nice, does anybody have experience in setting up a device for auto ascending. What sort of arrangement would that be? Thanks

Views: 448

Reply to This

Replies to This Discussion

Have yo considered the MastMate climbing device that is rigged in the mast/mainsail slot ? Maybe have both types.

Not for me at my age. Thanks for the suggestion. However, I finalized by ordering the Brion Toss, solid construction, significant redundancy with the safety aspects, a well conceived and manufactured product. The only issue is the salty price, but I have to admit second to none. 

Hey guys,  Before you go out and spend a few hundred dollars and more on a mast climber, Check out the "EasyClimb"  I saw a video on YouTube that explains how to make one and I did it. I made my EasyClimb for about 30 dollars. and guess what? It works as advertised. It's easy.  I'm adding the link to the Youtube video enjoy.   Easy Climb Video: http://youtu.be/tLoG0Zg8yOo

I use a tree climbing harness.

RSS

Latest Activity

Henri left a comment for Ron Manicom
"Ron, Henri from Vydec here. call me 703-314-6304. Hope all is well with you. Henri."
Friday
Henri left a comment for Ron Manicom
"Ron, Henri from Vydec, remember ? call me 703-314-6304. Hope all is well. Henri."
Friday
Mike Brown commented on CAN DRAC's group Beneteau 40 & 43
"Robert glad to hear you go the problem solved. mike"
Oct 11
Robert & Sandy commented on CAN DRAC's group Beneteau 40 & 43
"Thanks for all your comments my friends at Seaknots. The halyard has been rerun without passing through the small stainless steel eye, as seen easily in the pic provided by Chris on 17th August. All furling now takes place without any undue effort,…"
Oct 11
Mike Brown replied to Jochen Vetterlein's discussion O43: Good tracking on starboard side - poor on port side in the group Beneteau 40 & 43
"Well at least you’ve narrowed it down to the Genoa. I doubt here’s any issue with the hull or running gear. Nor do I think the slight list you have will have an impact either as many boats have the same based on how full the water and or…"
Oct 9
Jochen Vetterlein replied to Jochen Vetterlein's discussion O43: Good tracking on starboard side - poor on port side in the group Beneteau 40 & 43
"In the meanwhile, I performed some sailing tests trying to be as impartial as possible. I was sailing close hauled on the starboard and port side. I used the autopilot steering the boat at 37 degrees to the apparent wind. Apparent wind was 12 to 19…"
Oct 9
James Taylor replied to Jochen Vetterlein's discussion O43: Good tracking on starboard side - poor on port side in the group Beneteau 40 & 43
"Sounds like your rigging may be in need of tuning????? (Owned B43#19 for 10 years), Sailed from Mass to Tampa to Bahamas with it, great boat, no major issues at all. Boat has flat bottom basically so no need to put rails in water. I found it a very…"
Oct 9
Mike Brown replied to Jochen Vetterlein's discussion O43: Good tracking on starboard side - poor on port side in the group Beneteau 40 & 43
"I’d also do a test using only the main. The more testing you do the more likely you’ll find the problem. I’d also check to see how much the leeward shrouds sag during all the tests. Let us know what you find. Good luck Mike"
Sep 27
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2021   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service