Jose-Maria Castro's Discussions (2)

I have a seeping type leak near where the shaft exits my B43 behind the engine. The leak is not coming from the volvo seal, it puddles underneath the shaft and fills this area with saltwater after about two days. I have read a few posts on other sites about water leaking in from where the shaft exits the hull. Does anyone have any info on this. Going to call Beneteau tomorrow.Thanks DaveSee More

Hi All - I'm the proud new owner of an '11 B40.  2 cabin model with 54hp yanmar, furling main.  Have had the boat for a few weeks now and about 120 miles of sailing (and motoring).  Love it, but I have a few questions about wiring, rig tuning, plumbing, etc. and I'm hoping to find one or some of you to help.1.  The shower sump pump will run once the water level activates the float switch, pump the sump dry (kind of a pulsing suction, not smooth like the bilge pump), then enough water will flow…See More

I am having problems with my Teleflex engine control. It works fine controlling the throttle, mooves smoothly.  But when the tranny is engaged the lever is very hard to move past 10:00 inf orwrd, or 2:00 in reverse.  Once it passes that point it moves smoothly.   And going from forwrd to reverse is especially difficult.  I have a 2012 B40 with a Yanmar 53hp diesel.Any ideas?See More

While surfing the net, came across a B 485 that sank with a supposed rudder issue.  Forum member NeilPride posted a picture of a bracket to support B40 and B43 rudder posts.  First I had heard of this.  Has anyone had this added to there boat?http://www.cruisersforum.com/forums/f47/oceanis-485-steering-failure-160096.htmlSee More