cptn_steve's Discussions

Discussions Replied To (9)	Replies	Latest Activity
"There should be two set screws on the shaft side of the coupling. These will keep t…" cptn_steve replied Nov 15, 2011 to Best way to prevent the engine block from vibrating	36	Nov 15, 2011 Reply by Sherry
"Don't quite know what you mean with the shaft shifting. The only thing that comes t…" cptn_steve replied Nov 14, 2011 to Best way to prevent the engine block from vibrating	36	Nov 15, 2011 Reply by Sherry
"Just as a side note, don't do any prop shaft alignment while the boat is hauled out.…" cptn_steve replied Oct 29, 2011 to Best way to prevent the engine block from vibrating	36	Nov 15, 2011 Reply by Sherry
"Ha!!! it is interesting how information comes out. I'll bet you a dime for a dolla…" cptn_steve replied Oct 26, 2011 to Best way to prevent the engine block from vibrating	36	Nov 15, 2011 Reply by Sherry
"Well, it most likely is one of two issues then. Alignment or a prop issue. That is…" cptn_steve replied Oct 25, 2011 to Best way to prevent the engine block from vibrating	36	Nov 15, 2011 Reply by Sherry
"it could even be the prop got bent a bit. a diver can do a visual check on that too…" cptn_steve replied Oct 25, 2011 to Best way to prevent the engine block from vibrating	36	Nov 15, 2011 Reply by Sherry
"The only way it could be the alternator is if there were and extremely heavy load on…" cptn_steve replied Oct 25, 2011 to Best way to prevent the engine block from vibrating	36	Nov 15, 2011 Reply by Sherry
"it sounds like a fuel problem or if worst comes to worst, check the compression." cptn_steve replied Oct 24, 2011 to Best way to prevent the engine block from vibrating	36	Nov 15, 2011 Reply by Sherry
"If it runs rough while not in gear, it may not be running on all cylinders. I'd che…" cptn_steve replied Oct 24, 2011 to Best way to prevent the engine block from vibrating	36	Nov 15, 2011 Reply by Sherry

Discussions Replied To (9)

Replies

Latest Activity

"There should be two set screws on the shaft side of the coupling. These will keep t…"

cptn_steve replied Nov 15, 2011 to Best way to prevent the engine block from vibrating

Nov 15, 2011
Reply by Sherry

"Don't quite know what you mean with the shaft shifting. The only thing that comes t…"

cptn_steve replied Nov 14, 2011 to Best way to prevent the engine block from vibrating

Nov 15, 2011
Reply by Sherry

"Just as a side note, don't do any prop shaft alignment while the boat is hauled out.…"

cptn_steve replied Oct 29, 2011 to Best way to prevent the engine block from vibrating

Nov 15, 2011
Reply by Sherry

"Ha!!! it is interesting how information comes out. I'll bet you a dime for a dolla…"

cptn_steve replied Oct 26, 2011 to Best way to prevent the engine block from vibrating

Nov 15, 2011
Reply by Sherry

"Well, it most likely is one of two issues then. Alignment or a prop issue. That is…"

cptn_steve replied Oct 25, 2011 to Best way to prevent the engine block from vibrating

Nov 15, 2011
Reply by Sherry

"it could even be the prop got bent a bit. a diver can do a visual check on that too…"

cptn_steve replied Oct 25, 2011 to Best way to prevent the engine block from vibrating

Nov 15, 2011
Reply by Sherry

"The only way it could be the alternator is if there were and extremely heavy load on…"

cptn_steve replied Oct 25, 2011 to Best way to prevent the engine block from vibrating

Nov 15, 2011
Reply by Sherry

"it sounds like a fuel problem or if worst comes to worst, check the compression."

cptn_steve replied Oct 24, 2011 to Best way to prevent the engine block from vibrating

Nov 15, 2011
Reply by Sherry

"If it runs rough while not in gear, it may not be running on all cylinders. I'd che…"

cptn_steve replied Oct 24, 2011 to Best way to prevent the engine block from vibrating

Nov 15, 2011
Reply by Sherry

Mike Brown replied to Wayne's discussion Farewell all in the group Beneteau 40 & 43

"CAEA5280-4642-4EB0-A37A-056724ADE37C.mov"

May 17

Mike Brown replied to Wayne's discussion Farewell all in the group Beneteau 40 & 43

"Wayne, yes I'm still out here. She's looking good and you'll love her. The 38.1 is a perfect size for 2 people with occasional guest (s). Plus she's a sweet sailing boat. I'll attach a short video of one I was delivering…"

May 17

Wayne replied to Wayne's discussion Farewell all in the group Beneteau 40 & 43

"Mike if you’re still out there here is the new boat before commissioning. Should splash by end of this week after 14 months of anticipation! Wayne"

May 17

John Hanrahan liked sam's discussion eyebrow salon window re-bed

May 12

John Hanrahan replied to sam's discussion eyebrow salon window re-bed in the group Beneteau 40 & 43

"Sam, I am just in the process of replacing both of my eyebrow windows. I have the new ones from Beneteau and am talking with dealer in Florida re Bebeteaus advice. It would be helpful to talk to you about your experience. I have never seen…"

May 7

John Hanrahan posted a blog post

Cabin eyebrow windows

Good morning gang,I have received both port and starboard cabin windows from Beneteau for replacement as the existing leak and are badly etched. Beneteau has referred me to the dealership for installation but I'm having trouble getting a response. Does anyone have any experience replacing these and any recommendations. JohnSee More

Apr 28

0 Comments 0 Likes

Kerim N replied to Randy Brown's discussion Beneteau 40 Black Mesh Window Covers in the group Beneteau 40 & 43

"Hello Randy, New to the group, going through the posts, I have come upon this thread. I was considering tinting my windows of my Beneteau 43 with a darker tint, but I really like your idea. So I will copy with…"

Jan 6

Kerim N joined CAN DRAC's group

Beneteau 40 & 43

A place to exchange thoughts, ideas and discussions about the Beneteau/Oceanis 40 and 43 models.

Jan 6

61 Comments 12 Likes

cptn_steve's Discussions (9)

"There should be two set screws on the shaft side of the coupling. These will keep t…"

"Don't quite know what you mean with the shaft shifting. The only thing that comes t…"

"Just as a side note, don't do any prop shaft alignment while the boat is hauled out.…"

"Ha!!! it is interesting how information comes out. I'll bet you a dime for a dolla…"

"Well, it most likely is one of two issues then. Alignment or a prop issue. That is…"

"it could even be the prop got bent a bit. a diver can do a visual check on that too…"

"The only way it could be the alternator is if there were and extremely heavy load on…"

"it sounds like a fuel problem or if worst comes to worst, check the compression."

"If it runs rough while not in gear, it may not be running on all cylinders. I'd che…"

Latest Activity

Cabin eyebrow windows

Beneteau 40 & 43