SeaKnots

Any recommendations for replacement of the factory headliner around the perimeter of the cabin in the v-berth and aft cabin for the 2008 Oceanis 40 (or similar)? The current vinyl headliner with foam backing is falling leaving black foam residue in it's wake.

Views: 146

Replies to This Discussion

our 2009 B40 vinyl between the rigid ceiling and the hull started falling.  I vacuumed off the old foam.  we had pieces of mylar cover foam for car windshields on board left over from making side light covers.  cut strips wide enough to go from hull to a inch or so over the lip on the cabin liner.  folded vinyl around "stiff" foam and tapped on top.  Slide foam and vinyl back up into gap.  not a permanent fix but a lot better than having the vinyl hanging down.  

Mike

S/V MiJoy

RSS

Latest Activity

Accutek Packaging Machine updated their profile
Nov 10
Accutek Packaging updated their profile
Oct 21
Lucas updated their profile
Oct 9
Elowen updated their profile
Oct 9
Profile IconAssignment Mentor, Elowen, Hannah Morgan and 3 more joined SeaKnots
Oct 6
Cliyerlye posted photos
Aug 30
johnyosin updated their profile
Aug 29
Profile Iconpattem digital, Hagenman, johnyosin and 6 more joined SeaKnots
Aug 28
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2025   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service