SeaKnots

I have encountered discoloration of the mirrors mounted on the cabinets in the head. I have seen this before on bathroom mirrors in houses or in automobile side / rear view mirrors and the cause was moisture interaction with the mastic sealant used to mount the mirrors. Has anyone else experienced their mirrors discoloring (beginning at the edges-turning dark / black)?

Sam

B43, #9

LONGHAWK

Views: 932

Replies to This Discussion

I have not seen this yet on my mirrors.  I have a newer boat and this may be why I have not seen anything yet.  One would think with the technology they have today this should not be a problem.  I suppose the good news is that the mirror is not difficult or expensive to replace.

 

 

Alan

B43 PLAN B

#50

Hello,

 

On our Oceanis 43 from 2007 we have that also. I tried to order (and pay) a new mirror from Beneteau in 2008 and I am still waiting ...

 

Denis

Unfortunately, we have.

Sam, yes I noticed it this past fall. Hopefully it will remain as is.

Mike B43 #001

Hi Sam  Yes I can see it starting on my mirrors.  I think it is salt moisture attacking the silver coating on the back of the mirror.  On an earlier boat I replaced the mirrors at about year 10.

Regards

 

Gavin

NZ

Me too

I have been considering using some brown acrilic sealer around the mirrors, leaving a small breather gap at bottom away from shower.  My mirror closest to shower is bad but only just starting on rear mirror.  Does anyone know if this would help?? David B40

Just came back from my boat. Inspected the mirrors and they look pretty good to me though there could be a very very small amount of discoloration on edges .We hang dehumidifier bags in the heads and I really think this is helping to minimize moisture issues on our boat during sailing season and when the boat is being stored.
I'll check this in 2 weeks when I am on board .... Better for Beneteau if I don't have this problem to !

RSS

Latest Activity

Brandon P is now a member of SeaKnots
Apr 18
Pankaj Tripathi is now a member of SeaKnots
Mar 19
Anna Kokou updated their profile
Mar 8
Profile IconDo My Assignment, William Noah, Thinq Proto and 4 more joined SeaKnots
Mar 7
Michael Boyle commented on CAN DRAC's group Beneteau 40 & 43
"Hi All, french built 2010 43 has been very dry down below but now a slow leak has occurred which is showing at the limber holes under the floor board in forward cabin. Bilge pump goes every 3hrs for 20secs. Not sure if it’s fresh/rain water or…"
Feb 28
LOLA commented on Franc's video
Thumbnail

Do you dream about offshore cruising?

"hello been years since on site. im having trouble changing my heading. are we limited to words? is there an instruction page? Thank you lola"
Jan 23
Filling Machine updated their profile
Dec 27, 2024
Packaging Machinery updated their profile
Dec 24, 2024
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2025   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service