SeaKnots

This is an article I posted on our NauticEd blog this week so thought I'd share with this group as well.

What are they and what’s the difference? These two terms were established when vessels were fitted with tillers rather than wheels and so the term weather helm refers to having to pull the tiller (helm) “to weather” in order to sail in a straight line. Lee helm is when you need to push the tiller (helm) “to lee” in order to sail in a straight line.

Pulling the tiller to weather (or towards the windwind side of the boat) means that the boat left by it self would tend to turn into the wind. And conversely, lee helm would mean that the boat wants to turn down wind.

Now on a sailboat with a wheel, weather helm is turning the wheel away from the wind and lee helm is turning the wheel to helm in order to hold a straight course. This is because the wheel is opposite the rudder. Don’t get confused here - if you have to go back to fundamentals to work it out each time then just remember that sailing was invented thousand of years ago before the put wheels on boat. “Weather helm is rudder turned to weather”.

These phenomenons can be fixed quite simply by <...remaining article at http://www.nauticed.org/?p=376>;

Views: 111

Reply to This

Replies to This Discussion

when many discuss the handling of their sailing boats they mention they experience weather helm, which is the phenomenon occurring in brisk winds as the boat is overtaken and overpowered by the wind affecting the too small rudder or too large headsail--causing harder work to steer----in these modern boats thee wasnt any consideration mentioned for to or against the weather---just is there....makes boat more difficult to handle ......i was taught on gaff rigging with tiller and by an old salt from tallships--he never mentioned once anything pertaining to weather helm insofar as you have mentioned----so i am not able to comment on that particular phenomenon........

RSS

Latest Activity

Brandon P is now a member of SeaKnots
Apr 18
Pankaj Tripathi is now a member of SeaKnots
Mar 19
Anna Kokou updated their profile
Mar 8
Profile IconDo My Assignment, William Noah, Thinq Proto and 4 more joined SeaKnots
Mar 7
Michael Boyle commented on CAN DRAC's group Beneteau 40 & 43
"Hi All, french built 2010 43 has been very dry down below but now a slow leak has occurred which is showing at the limber holes under the floor board in forward cabin. Bilge pump goes every 3hrs for 20secs. Not sure if it’s fresh/rain water or…"
Feb 28
LOLA commented on Franc's video
Thumbnail

Do you dream about offshore cruising?

"hello been years since on site. im having trouble changing my heading. are we limited to words? is there an instruction page? Thank you lola"
Jan 23
Filling Machine updated their profile
Dec 27, 2024
Packaging Machinery updated their profile
Dec 24, 2024
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2025   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service