Adler Barbour Evaporator 6"x10"x11"

I need an Adler Barbour R12 evaporator box 6"x10"x11" to replace mine. I punctured it! The compressor (Danfoss Cold Machine) was working fine. It lost all pressure, so I will have to refill and pull a vacume. I have researched epoxy and/or brazing repair as an option, but have been told that doesn't work well. So, I am hoping to locate a used unit to reconnect to my compressor. Any possibilities and/or suggestions from any similar experiences would be appreciated.

0 members like this

Attachments:

68427701813_0_SM.jpg, 2 KB
22645701813_0_SM.jpg, 3 KB

▶ Reply to This

Replies to This Discussion

Permalink Reply by Ladye on April 15, 2009 at 2:24pm

.... what's that?

▶ Reply

Permalink Reply by LOLA on April 15, 2009 at 3:59pm

Ebay?

▶ Reply

Permalink Reply by Randy on April 15, 2009 at 4:55pm

Here is a tip for everyone that did what I did with a knife as I punctured the evaporator on our Catalina 36 5 years ago and is still working today, The evap is very thin aluminum and will not take heat or silver solder cuz it will just melt the evap. What you can do is go to Grainger supply and get what is called RED EPOXY if they still carry it, it is made just for this, It is heat activated.
Here is a link to what I used and explains it more in detail.
http://www.highsidechem.com/redepxy.html

Randy Sherwood