SeaKnots

Uncovered the boat yesterday, getting her ready to go, while checking things out I noticed that the Rule bilge pump was inop. Checked with the meter and no power. Can someone please tell me where the fuse for this pump is??

Thanks Dave

Views: 242

Replies to This Discussion

Update - From the schematic I know it is a 15 amp fuse, on wire 14, which I believe relates to CB or fuse 14 as well. Still searching....

It's under the seat with the house batteries just inside the aft cabin. There are a number of fuses in that area but it should be an open type that you push into the clips on each end. There are two next to each other located to the left of the GND Switch. One should be for the main bilge pump that sits under the seat with the hot water heater. The other should be for the Rule Pump. Good luck

Mike

October Moon

Thanks Mike, I know of the two below the seat, was hoping for another. After shooting wires I found that the person that owned the boat prior, wired the radio in with the bilge pump, crazy.

Dave, whoever did that doesn't understand boat electrical systems. I'd undo the radio for sure.

Mike

RSS

Latest Activity

Accutek Packaging Machine updated their profile
Nov 10
Accutek Packaging updated their profile
Oct 21
Lucas updated their profile
Oct 9
Elowen updated their profile
Oct 9
Profile IconAssignment Mentor, Elowen, Hannah Morgan and 3 more joined SeaKnots
Oct 6
Cliyerlye posted photos
Aug 30
johnyosin updated their profile
Aug 29
Profile Iconpattem digital, Hagenman, johnyosin and 6 more joined SeaKnots
Aug 28
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2025   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service